[Stan Weiss]

Originally Posted by Shockwave78

The float on the carb was adjusted backwards, so it was running extremely rich, I got that dialed in and it seems to be running lean, but the mixture screws are only 2 turns out, in a bit I'm going to reajust the mixture screws and recheck the timing and take it out for a spin, I am going to swap the plugs today so Ill post some pictures when they come out. And yes, the vacuum was 15" and it is 10" now

Good luck. For that cam and your engine specs 10" sounds to low.

Stan

[Shockwave78]

Originally Posted by Stan Weiss

Good luck. For that cam and your engine specs 10" sounds to low.

Stan

just found an intake leak at the heads on both sides, when I covered the primaries idling the engine picked up speed and the vacuum increased to 13-14"