[Tim Corcoran]

I appreciate everyone's suggestions I will check those things and report back. I did pull the dist. cap already to look at the contacts but I will look at it again. I replaced the number 3 plug wire with a known good wire and replaced the plug with a new plug. I will double check the firing order and try a different distributor cap too. This is a total mystery.

[Gach]

It’s really baffling to me it kind of don’t make sense. If the compression is good what it looks like for some reason the spark plugs not firing. Even though it seems to test that it is firing.

[Gach]

OK I just looked at both pictures at first I only looked at the first picture. The second one doesn’t look very good. Just out of curiosity I’d like to see what the other plugs look like. There might be a clue as to what’s going on. Looking at the plug is Definitely high heat range plug I’m not saying that that’s it but I would like to see the other plugs to see what they look like.

[Tim Corcoran]

Originally Posted by Gach

OK I just looked at both pictures at first I only looked at the first picture. The second one doesn’t look very good. Just out of curiosity I’d like to see what the other plugs look like. There might be a clue as to what’s going on. Looking at the plug is Definitely high heat range plug I’m not saying that that’s it but I would like to see the other plugs to see what they look like.

I showed two plugs, one from number 3 and one other plug. All the other plugs look pretty much like the clean one.