| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
This is exactly what I did with my 70 Esprit. (original car with 120k) I did 3.23 posi, bumped timing up to 10 deg advanced and rebuilt the carb. Literally like driving a different car. I think theres is a tad more in it too.
__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09 |
|
#2
|
||||
|
||||
|
So you just rebuilt the 2BBL carb? I was thinking a well tuned quadrajet would improve power and fuel economy both, and while i was that far, upgrade by raising compression with heads. Have 140s or 13s that I currently have. orig heads i believe are 11s on the car now which i believe are like 8:1
|
|
#3
|
||||
|
||||
|
Rear gear change, intake and 4 bbl, headers and dual exhaust. Leave the internals of that good running engine alone. I did that to a ‘65 Lemans 2 bbl 326. The rear gear ratio change came last. I did the headers and duals first which were the biggest bang for the buck. Made for a snappy little car up to 4000 rpm.
Everyone complains about header leaks but I never had issues. I’ve used copper, aluminum and Remflex and none have leaked. I always check the header flanges with a straight edge and grind any high spots or weld spatter before mounting. Using 1-5/8” headers, they aren’t that tough to tighten properly and retorque after the first heat-cool down cycle.
__________________
Triple Black 1971 GTO |
|
#4
|
||||
|
||||
|
Quote:
__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09 |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|