[bsblguy]

I just used a piece of sheet metal and bent it to the shape I needed. The corners I had to cut the width so it would bend. I used a piece of extra exhaust pipe that I cut and bent to the shape I needed for the corners and bolted it to a table. The corners were the hardest part.

[Firemedic833]

Originally Posted by bsblguy

I just used a piece of sheet metal and bent it to the shape I needed. The corners I had to cut the width so it would bend. I used a piece of extra exhaust pipe that I cut and bent to the shape I needed for the corners and bolted it to a table. The corners were the hardest part.

Thanks

[HWYSTR455]

You may want to try this place, they do stuff that's not listed too:

https://www.rustreplace.com/home/196...-1981-firebird

They make general 'stock' sections too. You might be able to use the trunk gutter stuff for what you need, or use it to start modding.

You might be able to chop up something from other models too:

https://www.opgi.com/sheet-metal-bod...yABEgKKVvD_BwE

.

[HWYSTR455]

https://www.ebay.com/itm/29608193226...Bk9SR8qB5tSRYw