| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
12-01-2023, 12:23 PM
|
||||
|
||||
Surprised mgarblik that the connecting rod you show did not have a letter code on the rod beam of the rod. Example "A" rods, "E" Rods, "L" Rods, "M" Rods, etc.
Must have been very early rods by the "Forging House" on the Lake Michigan side of the state. I have personally owned rods with all of the letters above as well as Ra-V rods. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
#2
12-01-2023, 12:40 PM
|
|||
|
|||
|
It is a very early production engine. The rods are all "A" series. The "A" is pretty faint on the beam. The heads have no casting number and no date codes. Only the complete part number. The above pic with the piston and rod in it shows the "A". Hard to see.
|
| Closed Thread |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
