Quote:
Originally Posted by DonnyD
its a 10.5-1 compression. Flat tops with the 87cc chambers. I may just swap out the cam, but now im kinda worried about vacuum and drivability. I guess you cant have the best of both worlds.
|
Sure you can,it's not the old days! You will get a hundred different opinions on cam choice..but the simple solution is go on the Butler site and pick another that has exactly the same valve lift..I've seen a few there when I looked so it will work with your current valvespring setup..something in that 235/245 range.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2,generic one inch open spacer
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471
|
03-10-2024, 05:01 PM
Hybrid Mode
