[Dragncar]

Thanks Paul, Monday I will call both ATI and Innovators West and see if I can get a .001 press fit and go from there.

I looking around at all this stuff I found a Jegs brand balancer/installer kit for 67 $. I had to pay 285$ for the Moroso kit.
I think you are better off with a true press fit and the price of that Moroso kit has probably has kept a lot of people with slip fit balancers.
67$ is a great deal. I am sure its made overseas but it gets the dampener on and off just the same.

https://www.jegs.com/i/JEGS/555/81395/10002/-1

[PAUL K]

Originally Posted by Dragncar

Thanks Paul, Monday I will call both ATI and Innovators West and see if I can get a .001 press fit and go from there.

I looking around at all this stuff I found a Jegs brand balancer/installer kit for 67 $. I had to pay 285$ for the Moroso kit.
I think you are better off with a true press fit and the price of that



Moroso kit has probably has kept a lot of people with slip fit balancers.
67$ is a great deal. I am sure its made overseas but it gets the dampener on and off just the same.

https://www.jegs.com/i/JEGS/555/81395/10002/-1

You're welcome. I had to look up that $300 Moroso kit as I never heard of it. After thirty years of using my $19.95 puller from Sears it was wearing out and I was lucky enough to purchase a second one from an estate sale for $5. I also use the old Craftsman installation tool. That's the original one I bought when I was a teenager and it's still working well.