| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
interesting;
so the “1972 only” pedal assembly #3998671 was only used from December 6, 1971 through to February 14, 1972 - This is a little over two months!(?) I wonder if the change to the “1972” assembly was something as minute as an assembly with an additional hole for mounting a wire assembly associated with the seat belt warning. I didn’t speak up earlier, because I was stumped at the assertion of a “1972-only” part; I figured that maybe I would say something after someone more knowledgeable than me speaks up… At a glance, the assertion of a “1972 only” part doesn’t quite fit in with the way (that at least I have perceived) GM to do things… I too had understood that the clutch pedal was the same one used for 1971. Maybe the part number revision was something as small as a supplier change?? Wasn’t the assembly a combination of parts(?); The mount was the same for auto or stick cars; The “assembly” was the combination of the mount, brake pedal, and (in the case of a manual transmission) a clutch pedal.
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
|
#2
|
||||
|
||||
|
Mike, thanks for looking that up and posting the part number changes and dates. That answers a lot of questions. Much appreciated!
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|