| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
![]() |
|
| THE LOBBY A gathering place. Introductions, sports, showin' off your ride, birthday-anniversary-milestone, achievements, family oriented humor. |
| Reply |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
I did a little pre driving season Maintenance on the Mallett Solstice, Oile & filter change, rotated the tires. Stareted thinking what else needed to be done before Driving it in June from Michigan to Taos NM. I looked and the Colant and Brake fluid are now 5 years old so time to change those out. Maybe do a fuel injection clean and change the original 19 year old spark plugs, they only have 53K on them but better here than somewhere along Rt 66 in June!
__________________
Jeff R 60 Jaguar Mark 2, 3.8L Automatic 67 Sprint Firebird 230 OHC-6 4-Speed A/C 1971 Fiat 130 Coupe 3.2L SOHC V6, ZF 5-speed 78 Catlina Safari, Pontiac 400 powered 77 Astre Formula, 215 Buick V-8 T-5 73 Lemans Safari, 400 4bbl 4-speed 71 Catalina Enforcer, 455 4bbl 05 Dodge Magnum 3.5L SOHC V6 06 Mallet Solstice #024 LS2, Now with a Tremec 6060 6-speed! 2012 F-150 Echo Boost (My local Ford Dealer SUX!!!) 2020 Dodge Charger Scat pack (recovered) |
| The Following User Says Thank You to camerjeff For This Useful Post: | ||
|
#2
|
||||
|
||||
|
On one of the trips it rained pretty good - the wipers worked but made a lot of racket. I figure 6 months in NM and another 4 in a metal box did not do them any good so new ones are needed.
A short trip to a local chain NorAuto revealed a pretty good selection of blades. Of course no refills offered. They had one of those electronics parts finder doo-dads which DID have Pontiac but only back to 1974... Being the EU all is in metric, so 400mm are needed. 3 classes of blades were on offer: no-name low group at €2,49* then €12,99 for the mid range and top shelf Bosch around €39,99 (eep!) Mid range it is. These all come in non-sealed cardboard boxes so I could examine them for fitment. The Bosch midrange had an identical body to my existing set; all I needed to do was swap out the little adapter clips on the new ones (bayonet style) for the OEM post style clips. The original OEM units were always a real pain in the ass to swap so the Bosch units with the little release tab are wonderful - other than they do not look stock. For this I care not. *one wonders what sort of rubber you get for this price point? :X Last edited by Scarebird; 03-18-2025 at 09:30 AM. |
| The Following User Says Thank You to Scarebird For This Useful Post: | ||
| Reply |
| Thread Tools | |
| Display Modes | |
|
|