[67Lemons]

Originally Posted by foxgapLeMans

Darn it, I did not think of putting the cone on the back side of the balancer, I'm going to pull the one wheel that would not hub balance and try it.

The reason that the wheels were washed with the vinegar and water solution is that soda blasting leaves a film on the parts that needs to be removed before priming or the primer and paint will come out looking pretty bad.

Just as a quick FYI, avoid using the cone on the front of the wheel as that it is not always trued for a hub centric wheel due to various center cap designs, always a best practice to cone from the rear when using cones.