#1  
Old 07-31-2025, 09:14 AM
burd's Avatar
burd burd is offline
Ultimate Warrior
 
Join Date: May 2011
Location: MOTOR CITY
Posts: 2,024
Default

Did you remove switches and look?

__________________
🧩 Burds Parts, Finding those Hard to Find PCs, no Fisher Price Toys Here
Southern Hamtramck Institute of Technology , Alumni
Put some 8” flakes and BFG’s on dude!, like everyone does🙄

Burds Literature, nOS factory Brochures, Glovebox literature, & black & blue freedom toppers.

1978 YEE
1995 Q45

#whoremembers
  #2  
Old 07-31-2025, 09:29 AM
Harry The Hammer Harry The Hammer is offline
Member
 
Join Date: Jan 2014
Location: Alberta,Canada
Posts: 46
Default

No I never removed the switches,I did lube them up again. My thought is the courtesy lights work with the switches so they are OK. I also looked under the dash near the coutesy lights and never saw anything amiss.

Would hate to pull out the switch and have a connector come loose as that could be hard to get the wires back in place.

  #3  
Old 07-31-2025, 11:24 AM
ta6point6's Avatar
ta6point6 ta6point6 is online now
Senior Chief
 
Join Date: Jun 2003
Location: CO
Posts: 252
Default

Are you sure you have 12 volts on one side of doom light connector? If you do then there is no reason that the light should not come on with 12 volts and some kind of ground at dome light.

__________________
going bandit-Reynolds style
  #4  
Old 07-31-2025, 12:29 PM
Harry The Hammer Harry The Hammer is offline
Member
 
Join Date: Jan 2014
Location: Alberta,Canada
Posts: 46
Default

Yes tested with a multimeter and had 12.2 volts on one side of the dome light.
I thought for sure once i added the temporary ground to the dome light terminal it would light up. I pulled the headliner down a bit and made sure the 2 wires were present and not broken. They are and still in the factory holders

From what Ive been reading the dome light system has 3 grounds ,2 at the door switch terminals and the headlight switch,which still has the gauges ground in place

I dont get why it would just up and quit,old I guess?

  #5  
Old 07-31-2025, 01:05 PM
johnta1's Avatar
johnta1 johnta1 is offline
Ultimate Warrior
 
Join Date: Feb 2001
Location: now sunny Florida!
Posts: 22,517
Default

The other door doesn't let it work either?


If so, I'd look at the dome light housing?
Might have broken wire of some loose connection there.


Run a wire from a good ground to the dome bulb housing?



__________________
John Wallace - johnta1
Pontiac Power RULES !!!
www.wallaceracing.com

Winner of Top Class at Pontiac Nationals, 2004 Cordova
Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats

KRE's MR-1 - 1st 5 second Pontiac block ever!

W.E.C moment


"Every man has a right to his own opinion, but no man has a right to be wrong in his facts."

"People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates
  #6  
Old 07-31-2025, 01:18 PM
"QUICK-SILVER" "QUICK-SILVER" is offline
Ultimate Warrior
 
Join Date: Feb 2008
Location: Alexander City, Alabama
Posts: 5,561
Default Double check fuses

Dome and courtesy have separate fuses. They do share the same ground switches.

Volts you're seeing at the dome light could be back feeding through the courtesy lights. You could see volts but not enough amps to light the dome light.

Clay

  #7  
Old 07-31-2025, 01:25 PM
Harry The Hammer Harry The Hammer is offline
Member
 
Join Date: Jan 2014
Location: Alberta,Canada
Posts: 46
Default

Nope dome light wont come on with either door open and cant see anything wrong with the dome light wiring or the dome light connectors.

Thats a good idea to ground the housing perhaps the screws into the roof are not making good contact?

  #8  
Old 07-31-2025, 01:42 PM
Harry The Hammer Harry The Hammer is offline
Member
 
Join Date: Jan 2014
Location: Alberta,Canada
Posts: 46
Red face

I just did a ground test on the dome housing in place and also removed from the roof and I still cant see the light.

I didnt know the courtesy lights and dome are on different fuses,I did have a good look at the fuses in the fuse box and never saw one fried.

Next thing for me will be to find out the exact fuse the dome light would be

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:05 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017