[67Lemons]

Originally Posted by blueghoast

Well can't help myself, I just bought a bunch of stuff from S-Master.
Single plane intake a set of there gold roller rockers look like HS
A billet 8000 MSD style dizzy, 2.19 intake valves a 2 inch blower spacer
Oh and a set of cometic style head gaskets .040 thickness 4.200 bore.
I thimk thats it. Was gona buy some more heads but I've got enough
of them for now. Still another day left get it while ya can.
Can't beat the prices.

GT

Wow, you’re really tempting fate aren’t you with all the reports of EVERY rocker arm except for stock or stainless Crower’s blowing up if you look at them wrong. Half tongue in cheek but curious to hear your results since I need a set of rockers soon as well.

[Dragncar]

Originally Posted by 67Lemons

Wow, you’re really tempting fate aren’t you with all the reports of EVERY rocker arm except for stock or stainless Crower’s blowing up if you look at them wrong. Half tongue in cheek but curious to hear your results since I need a set of rockers soon as well.

EVERY is a big word. Harland Sharp rockers still have a good reputation. I have some Norris SS rockers that have been bullet proof. Also have some Butler/Angus aluminum rockers that did not give me any trouble.

[67Lemons]

Originally Posted by Dragncar

EVERY is a big word. Harland Sharp rockers still have a good reputation. I have some Norris SS rockers that have been bullet proof. Also have some Butler/Angus aluminum rockers that did not give me any trouble.

It sure is which is why it was said tongue in cheek but there are a lot of reported failures around here which does make a person a little nervous when they consider buying anything other than the good ones frequently mentioned on this site.