[blueghoast]

Originally Posted by Half-Inch Stud

Sounds great for you. I'm impressed with their dual-plane port alignment and all else with it

I was going to answer you earlier about the single plain intake, sorry I'm late.
This is a super nice intake, the runners are nice and straight, I held my
flashlight at the intake flange and could see straight through every runner.
It's kind of like a medium riser intake that should flow very well and with a
1-2 inch spacer would get a good plenum depth. I've got a motor on the
test stand now and I'm going to try it today with a 1-2 inch spacer.
This summer I'll test it against a RPM in the car and report that too.

GT