| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
![]() |
|
| THE LOBBY A gathering place. Introductions, sports, showin' off your ride, birthday-anniversary-milestone, achievements, family oriented humor. |
| Reply |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
https://www.hughesperformance.com/street-strip-trans/
The only way you know for sure with a used unit is to install it . You don't need 'Kevlar' bands or clutches. IMO 650hp is nothing for a t400 trans. I would recommend Hughes Transmission. I ran a stock used 350turbo for 4yrs. before it finally failed. With a 350hp 400 Pontiac and a 200 hp hit of nitrous. Good luck. Maybe Half-inch stud will chime in on this.
__________________
https://www.flickr.com/photos/197745168@N07/ "Of all ignorance, the ignorance of the educated is the most dangerous. Not only are educated people likely to have more influence, they are the last people to suspect that they don’t know what they are talking about."Thomas Sowell Last edited by KS circutguy; 01-17-2026 at 07:44 AM. |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|