| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
04-08-2026, 08:44 PM
|
|||
|
|||
I just went through this recently with a 12 bolt rear out of a 65 Chevelle that’s going into my 65 GTO. After doing some research I went with the TA Performance no hop bars. They are very nicely made out of 3/4” thick steel with nice welds. Just like every other brand I had to do some grinding on the rear and also on the bars. The idea is to grind strategically to remove as little material as possible. When I was done the bars looked like they came that way and what I did to the rear was unnoticeable.
|
| The Following User Says Thank You to ANDYA For This Useful Post: | ||
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
