[Zach]

Originally Posted by bdk1976

I think I had to shim my older summit branded mini starter 1/8" or so to get it where it needed to be (I agree far from ideal but seems to be working out fine). Lots of info/opinions on this if you do a search.

Are you referring to 1/8” on both bolts or just 1? I’m just shimming the outside bolt to pull it closer to the ring gear. I fear adding more shims to get it closer is going to give me mounting issues, I’m at .10” and need even more shims still. Hard to find information on shimming towards the ring gear instead of away.

[bdk1976]

Originally Posted by Zach

Are you referring to 1/8” on both bolts or just 1? I’m just shimming the outside bolt to pull it closer to the ring gear. I fear adding more shims to get it closer is going to give me mounting issues, I’m at .10” and need even more shims still. Hard to find information on shimming towards the ring gear instead of away.

Just the outside one.