[Jay S]

Would there room to install the tee down on the outlet of the Robbmc pump?

On my cars I don’t run a seperate line. I put the electric pump in series using the same line and use a vane style pump that pushs fuel through the mech pumps, some pumps are harder to pump fuel through, on those it reduces the cranking time to get fuel, but the engine has to crank a little bit. Carters electrics I use a tee and a check valve so the mechanical pump can pull fuel around the electric easier, Holley style van pumps I don’t add a tee, it is all in series. In tank electric is nice, I have a couple of them too.