[BMFH]

Hello All

Here is the Link to esslingeracing.com

They Produce the Profile Tips for the Valves, I have used then on several engines, they Help adjust the Valve Tip Heights when using Aftermarket Cams. They are Also Hardened.

The sides will NOT need trimming to fit the follower groove, the tips are 11/32" the Same size as the Valves.

They also make a Lot of Speed Equipment for the Ford 2.3 L Pinto Engine that is Still Raced in today's world.

The BMFH used them for its Roller Cam Modification.

https://esslingeracing.com/ford-2-va...-engines-parts

Take Care,

Dusty/BMFH

[Cammer-6]

in checking I no longer see listing for .100 lash caps
Ive found:
Crane .050
Crower .060 also have some for Pintos that have sides shaved
Manley .080
Comp Cams .080
prices vary from $17.50 set of 16
to $119

Originally Posted by BMFH

Hello All

Here is the Link to esslingeracing.com

They Produce the Profile Tips for the Valves, I have used then on several engines, they Help adjust the Valve Tip Heights when using Aftermarket Cams. They are Also Hardened.

The sides will NOT need trimming to fit the follower groove, the tips are 11/32" the Same size as the Valves.

They also make a Lot of Speed Equipment for the Ford 2.3 L Pinto Engine that is Still Raced in today's world.

The BMFH used them for its Roller Cam Modification.

https://esslingeracing.com/ford-2-va...-engines-parts

Take Care,

Dusty/BMFH