#1  
Old 02-05-2003, 01:12 PM
fast1970transam's Avatar
fast1970transam fast1970transam is offline
Ultimate Warrior
 
Join Date: Nov 2002
Location: Oakland, Ca
Posts: 1,191
Default

On my 70 firebird i need a new cowl piece, i was wondering if one from a camaro will fit, they look pretty much the same. any help thanks



My 1970 firebird being turned into a 73 t/a clone g-machine. brewster green of course. lowered 1 inch. 17's all around.

  #2  
Old 02-05-2003, 01:12 PM
fast1970transam's Avatar
fast1970transam fast1970transam is offline
Ultimate Warrior
 
Join Date: Nov 2002
Location: Oakland, Ca
Posts: 1,191
Default

On my 70 firebird i need a new cowl piece, i was wondering if one from a camaro will fit, they look pretty much the same. any help thanks



My 1970 firebird being turned into a 73 t/a clone g-machine. brewster green of course. lowered 1 inch. 17's all around.

  #3  
Old 02-05-2003, 03:22 PM
fast1970transam's Avatar
fast1970transam fast1970transam is offline
Ultimate Warrior
 
Join Date: Nov 2002
Location: Oakland, Ca
Posts: 1,191
Default

thanks jim

My 1970 firebird being turned into a 73 t/a clone g-machine. brewster green of course. lowered 1 inch. 17's all around.

  #4  
Old 02-22-2003, 10:23 AM
Chuck Jones Chuck Jones is offline
Junior Member
 
Join Date: Feb 2003
Location: Bristol CT
Posts: 11
Default

I thought I'd share a little knowledge that I picked up while working in the parts department of a dealer that handled Chevrolet, Pontiac, and Buick About "thirtysomething" years ago.The following generalizations about interchangability of parts between Pontiac and Chevrolet apply to most "A body"(Tempest,Chevelle,GTO) and "F body"(Camaro and Firebird)cars built between 1964 and 1972 (maybe later). As well as some "G" and"B"bodys {Impala, Catalina,Monte Carlo,69+ Grand Prix)

The following concern seven digit part numbers that may be cast or stamped on various parts as well as the seven digit Part numbers that are found in the master parts catalog (6 and 8 digit numbers follow different rules)

Numbers that start with 37,38,39,or 40 are Chevrolet design numbers. If found in a Pontiac catalog they will most likely interchange with similar models of Chevrolet.(IE:3736097)

Numbers that start with 97 (IE: 9786339) are Pontiac designed numbers and will most likely fit only a Pontiac.

Of note also is the fact that the casting numbers on many cast parts will differ slightly (by one or two digits) from the actual part numbers in the master parts catalog and the number on the box or tag. (IE: a cam with a casting #3736096 will carry a part number of 3736097)

The preceding were only generalizations and of course there will be exceptions to every rule. To be sure please carefully compare parts physically before buying or attempting to install them.

If, however, you have access to both the Pontiac and the Chevrolet master parts catalogs you can look up the part numbers of both similar models . If they carry the same part number you can be sure that the parts are same. The master parts catalog may also list other models or series that may use this same part.

Hope this helps some of you in search of parts.

__________________
Save your empty beer cans! The Japanese need 'em to make cars!
  #5  
Old 02-23-2003, 02:50 PM
fast1970transam's Avatar
fast1970transam fast1970transam is offline
Ultimate Warrior
 
Join Date: Nov 2002
Location: Oakland, Ca
Posts: 1,191
Default

thanks

barking gears means nothing unless u can spin them at 60 mph +. thats raw power

  #6  
Old 02-22-2003, 08:48 PM
Chuck Jones Chuck Jones is offline
Junior Member
 
Join Date: Feb 2003
Location: Bristol CT
Posts: 11
Default

You might try East-West autoparts in Oklahoma. Their website is WWW.pontiacpart.com. They are parting out several 2nd generation camaros and firebirds. they will ship parts by truck all over the country.

__________________
Save your empty beer cans! The Japanese need 'em to make cars!
  #7  
Old 02-22-2003, 12:50 PM
fast1970transam's Avatar
fast1970transam fast1970transam is offline
Ultimate Warrior
 
Join Date: Nov 2002
Location: Oakland, Ca
Posts: 1,191
Default

thanks for the help, i'm still looking for a good cowl out there, thanks

barking gears means nothing unless u can spin them at 60 mph +. thats raw power

  #8  
Old 02-05-2003, 03:18 PM
jim darlington jim darlington is offline
Chief Ponti-yacker
 
Join Date: Feb 2000
Location: Easton Pa USA
Posts: 509
Default

Yes

Man is not complete until he's married , then he is finished !

__________________
Man is not complete until he's married , then he is finished !
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:11 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017