[klunker]

I am parting out a 66 LeMans 2 door hard top
It is a 326 2 barrel
Manual Steering
Manual Brakes
4 Speed
Console
Bucket seat
3.36 Posi

A very Nice Black Interior
The buckets are Pretty good, Drivers side would need the outside back strip replaced other than that both buckets original upholstery is very good. The backs have surface rust where the paint fell off and rust started.
The rear seat is very good, no issues.
The door panels (front and rear) are very good.
The original Carpet is even good.
The console has some pitting on it. The plastic base appears to be very good yet.
The steering wheel is excellent, no cracks.
The grab handle is excellent
The "lemans" grab handle bezel looks good.

No part too small, will break things down, seperate or test items if requested.
Send Me a direct email to [email protected] or call 920-876-3066
No PM's Please.
No Paypal! I will take cash, checks or money orders only.
I will send pictures of parts upon request.
Thanks
Dirk

[carguy66cars]

Need to post some prices or this will be removed! Just saying, I'm interested in the posi unit how much and is it just the posi or the hole rearend?

Lyn.

[klunker]

Lyn,
Complete rear end (backing plates, axles, gears, center section, housing and Yoke) $400
Center section only, no gears $200.
Now there are some prices.
I will ship center section but not whole rearend.
Thanks
Dirk

[marxjunk]

you need to price everything listed or they will delete it..thats what Lyn is trying to say...

[klunker]

Originally Posted by klunker

I am parting out a 66 LeMans 2 door hard top
It is a 326 2 barrel
Manual Steering
Manual Brakes
4 Speed
Console
Bucket seat
3.36 Posi

A very Nice Black Interior
The buckets are Pretty good, Drivers side would need the outside back strip replaced other than that both buckets original upholstery is very good. The backs have surface rust where the paint fell off and rust started. $250
The rear seat is very good, no issues. $100
The door panels (front and rear) are very good. $100
The original Carpet is even good. $20
The console has some pitting on it. The plastic base appears to be very good yet. $300
The steering wheel is excellent, no cracks. $150
The grab handle is excellent $50
The "lemans" grab handle bezel looks good. $25

No part too small, will break things down, seperate or test items if requested.
Send Me a direct email to [email protected] or call 920-876-3066
No PM's Please.
No Paypal! I will take cash, checks or money orders only.
I will send pictures of parts upon request.
Thanks
Dirk

I added some prices

[baron_]

black standard steering wheel?

I'll send an e-mail

[GTO JOHN]

Dirk, If Lyn passes, I'd be interested in the rear end complete. Would pickup.
Also interested in buckets, back seat, and door panels plus steering wheel if baron passes.
Thanks John

[Greg Reid]

I'm interested in the 4spd console and the tail panel 'eyebrow' trim. Interested in a decent set of bumpers too but I expect shipping would be a killer.

[fyrffytr1]

Was this an A/C car?

[Stinkyee]

I would like info on the transmission system. I want to convert fron auto to 4 speed.

[carguy66cars]

Dirk, I will be calling you.

Thanks Lyn.

[klunker]

Lyn, looking forward the call, 920-876-3066

Stinkyee, The transmission is a muncie 4 speed, factory hurst shifter. I have everything from the flywheel to the Transmission The only thing you would need is the fork that is welded to the frame and the shifter bump that goes on the floor. I have someone possibly interested in the frame and body shell so I can't cut out the fork and the bump at this time.
For transmission, flywheel, bell housing, clutch disc, pressure plate, clutch fork, ball stud for engine block, all the pedals, z-bar and clutch linkages and the floor shift column with the seal plate for the clutch rod I'd need $1400. Let me know if you want it so I can get it to the next guy if your going to pass on it. Thanks

fyrffytr1, No, this is not a A/C car

Greg, the four speed console is still available, send me a direct email and I'll send you pictures. The "eye brow" trim on the drivers side might be salvagable as a plating core. Pass side was smashed. If you buy the console I'll throw in the driverside eyebrow. The bumpers are not what I would use as cores (surface rust) and shipping would run about $75 ea. I would guess. I can send pictures of the bumpers too if your still game.

Baron, yes, standard black wheel, very nice shape. No cracks. One other person is ahead of you. I'll let you know if I don't hear back from him.

Thanks All who have bought stuff already and thanks PY for this forum!!

[Nuts an Bolts]

Hi ... do you have any interior parts left .... need all side panels annd bucket and back seats .. thank you ... Jim 805-701-2351