FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Non Pontiac Motors in Pontiacs includes factory 403,305,350 Chevy, Buick V6, Also Pontiac Motors in non-Pontiacs! |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Oldsmobile flywheel question
I thought I heard that Pontiac manual trans flywheel....will work on Olds V8.
Have a 75 400 Pontiac flywheel...Will this fit/work...on 73 350 Olds? |
#2
|
|||
|
|||
I am pretty sure that a Pontiac flywheel will not fit the bolt pattern of the Oldsmobile. I have had about 5 442s over the years and once I had a pile of flywheels that were all Pontiac except one which did fit the Olds, but not the Pontiacs.
|
#3
|
||||
|
||||
Good question. I did a 4 speed conversion in my 69 firebird in 1996. I bought the flywheel, shifter, and muncie of my buddy Chalie. He was going to put it into his 72 cutlass with a olds 350. He only sold it because his crank was not drilled for a pilot bearing. I put everything in my car. Did the guy he got it off of have a poncho flywheel? Maybe so...
__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09 |
#4
|
||||
|
||||
NO ! Those parts do not interchange on Pont and Olds .. a 73 350 needs a Olds 350/455 flywheel 1968-1976 also 99% of Olds V8s were Automatic and the back of crank is not drilled for the pilot bearing/bushing unlike our Pontiacs and Chevrolets so if you are going with that engine prepare to do that first or factory in all the cost first.
__________________
63 Catalina coupe 467 cid budget drag car 11's 1/4 , 7.20 1/8th pump gas n/a 66 Star Chief Executive 57k mile 67 IH Scout project 2WD "Indian Scout" 69 Le Mans 2 dr HT 350 85k mile 15 sec 1/4 69 Firebird 400 Burgandy/Black 70 Olds Rallye 350 F85 4 speed 3.91's 70 Olds Cutlass Cruiser Red Wagon 350 101k miles 15 sec 1/4 12 sec w 455 74 Cheyenne Super C10 LWB Gen 6 454 w ZZ502 cam 3.07gear 13.1 1/4, 8.3 1/8 2020 RAM 1500 SLT 4x4 5.7 A8 Hemi 2007 Hummer H3 3.7 liter turd |
Reply |
Thread Tools | |
Display Modes | |
|
|