FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
THICK Round Port header gaskets?
Can anyone recommend to me some very [B]thick[B] round port header gaskets? I have to run an engine diaper this year and mock fitting my new SM heads with a spare Moroso pan and round port headers is showing a issue. I need atleast enough room to be able to wrap the two tubes that are in contact with the diaper and to be able to drop the diaper for oil changes.
__________________
Johnny US Army Retired 1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
#2
|
||||
|
||||
Rim Flex 12-002 header gaskets are thicker than 2 of the Fel Pro gaskets stacked. They work great.
|
#3
|
||||
|
||||
You might be better off getting another flange to sandwich in there.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
The Following 2 Users Say Thank You to steve25 For This Useful Post: | ||
#4
|
|||
|
|||
Another flange set will cost more than a set of remflex plus 2 sets of any other gaskets and he is already tight for room? Tom
|
#5
|
||||
|
||||
DEI makes a header wrap that may work. If you can, make a belly pan and you will be so much more happy than fighting a diaper.
__________________
Dave Polichena |
#6
|
||||
|
||||
It’s going to melt Anyway wrap
Is better then nothing until it gets wet
__________________
1969 carousel red firebird 455, richmond 5 speed 1964 540 gto 1971 lemans sport convertible 1972 Maverick under slow construction |
#7
|
||||
|
||||
The good news for me is that on my mockup picture, I have neither head gaskets or exhaust gaskets. Just for giggles, I'm going to throw on a D-port head and a Hedman Hussler header that I have. It's too damn cold today though!!
__________________
Johnny US Army Retired 1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
#8
|
||||
|
||||
Quote:
GT |
#9
|
||||
|
||||
My DRE diaper has a kevlar shield sewn in. It literally lays on some of my tubes with no problems.
|
Reply |
Thread Tools | |
Display Modes | |
|
|