| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
02-19-2025, 03:01 PM
|
||||
|
||||
69 Lemans/GTO Reproduction Rear Bumper
Has anyone installed and is happy with the fit of a 69 reproduction rear bumper? Particularly the fit at the wrap around part of bumper where the ends meet the recessed vertical body line at the quarter panel? I’ve seen pics showing the poor fit but then seen other comments where folks say they fit well. Makes me wonder if it depends on when the parts have been made. Would like to see pics of relatively recent experiences. Of note, Ames describes the reproduction bumpers as very good with this note, “*MAY NEED TO OPEN BOLT HOLES UP TO ACCEPT CARRIAGE BOLTS* QUALITY AND FIT IS VERY GOOD. THESE ARE SHOW QUALITY COPPER NICKEL TRIPLE CHROME PLATED.”
https://www.amesperf.com/parts/26209/
__________________
Will Rivera '69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears '69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress ‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here: https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb |
|
#2
02-19-2025, 04:24 PM
|
||||
|
||||
|
All I have seen did not fit that good. I modified the brackets on mine for a tight fit front and back.
|
| The Following User Says Thank You to GTO JONES For This Useful Post: | ||
|
#3
02-20-2025, 07:33 AM
|
||||
|
||||
|
Thanks - do you have a close up photo of the sides/corners that shows the fit? Also, did you have to bolt holes for the carriage bolts?
__________________
Will Rivera '69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears '69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress ‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here: https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb |
|
#4
02-20-2025, 11:19 AM
|
||||
|
||||
|
Quote:
|
|
#5
02-20-2025, 10:42 AM
|
||||
|
||||
|
I should have some pics I'll look. We cut about a 1/2" out of the brackets and welded it back together, that worked on the back on the front we slotted the holes.
|
| The Following User Says Thank You to GTO JONES For This Useful Post: | ||
|
#6
02-20-2025, 01:00 PM
|
||||
|
||||
|
Sent via PM - thank you
__________________
Will Rivera '69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears '69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress ‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here: https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb |
|
#7
02-20-2025, 01:08 PM
|
||||
|
||||
|
Will,
I have one on my car and I'm happy with it. I'm not going for best of show as you know. If I had a RA4 Judge vert I'd search for an original to replate.
__________________
Chris D 69 GTO Liberty Blue/dark blue T400, 9" w 3.50s, 3905lbs 461, 850 Holley, T2, KRE 310s, Comp HR 236/242D .572/.594L, RA manifolds, 11.53@114, 1.55/60 The spare: 467, 850 Holley, T2, Edelbrock Dport 310cfm w RA manifolds, Howard HFT 245/251D .561/.594L, 11.59@ 114, 1.57/ 60' |
|
#8
02-20-2025, 01:52 PM
|
||||
|
||||
|
Thanks Chris - shoot me some pics when you get time
__________________
Will Rivera '69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears '69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress ‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here: https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb |
|
#9
04-12-2025, 06:35 PM
|
||||
|
||||
|
Had one on my car for a while until l got original recorded. Had to modify the mounting holes but that wasn't difficult. What I really didn't like was the fit around the taillights. The openings slope up toward the center. If you want one cheap I still have it. It's clean and I'd take $50 + shipping cost. I'm north of Philly about 40 mins.
__________________
Ain't as good as I once was, but I'm as good once as I ever was. |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
