| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-13-2002, 09:51 PM
|
|||
|
|||
I have a set of repro D-port exhaust manifolds that I want to put on my 67 goat. I would prefer to use studs instead of bolts to mount the manifolds to the heads. Does anyone know of a source for grade 8 studs for this application?
Thanks - Jim |
|
#2
09-13-2002, 09:51 PM
|
|||
|
|||
|
I have a set of repro D-port exhaust manifolds that I want to put on my 67 goat. I would prefer to use studs instead of bolts to mount the manifolds to the heads. Does anyone know of a source for grade 8 studs for this application?
Thanks - Jim |
|
#3
09-14-2002, 10:57 AM
|
|||
|
|||
|
try a local parts store if they don't have them they should be able to order them.
why do you want grade 8 for exhaust? it would seem to me that the heat would eventually take the temper out of them anyway. just curious, mike [ September 14, 2002, 10:58 AM: Message edited by: mike nixon ]
__________________
so many pontiacs, so little time.................. moderator is a glorified word for an unappreciated prick.................. "Only two things are infinite, the universe and human stupidity, and I'm not sure about the former." --Albert Einstein "There is no such thing as a good tax." "We contend that for a nation to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle." - Winston Churchill |
|
#4
09-15-2002, 11:23 AM
|
|||
|
|||
|
Mike -
I tried a parts store with no success, but you're right. I should try another place. As far as the grade 8 goes, I think you can safely torque them more than untempered fasteners. I don't know what alloy grade 8 fasteners are typically made from, but in my experience with heat treating tool steels, temperatures well over 1200 degrees are required to aneal tempered steels. What this all means is if this highly technical metalurgical theory is bull-sh--, I can resort to the truth and say "couldn't hurt". |
|
#5
09-15-2002, 01:11 PM
|
|||
|
|||
|
if the parts store doesn't do you any good try a machine shop or a farm implement dealer. either of these should be able to order what you want.
mike
__________________
so many pontiacs, so little time.................. moderator is a glorified word for an unappreciated prick.................. "Only two things are infinite, the universe and human stupidity, and I'm not sure about the former." --Albert Einstein "There is no such thing as a good tax." "We contend that for a nation to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle." - Winston Churchill |
|
#6
09-15-2002, 09:57 PM
|
||||
|
||||
|
The torque spec on the RA manifolds is only 35lbs. I think where the grade 8's will come in handy is 5 years from now when you need to take them out. Should be less likely to break. David
__________________
 frittering and wasting the hours in an off hand way.... 1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core. 
|
|
#7
09-15-2002, 10:16 PM
|
||||
|
||||
|
Don't forget the Anti-Seize!
__________________
"Three may keep a secret, if two are dead" ~ Benjamin Franklin ~ |
|
#8
09-16-2002, 09:12 AM
|
||||
|
||||
|
2nd on the anti-seize. I like the way it gets on your fingers at the worst possible times. Makes starting a bolt with your hand wedged up in some impossible location a challenge. David
__________________
frittering and wasting the hours in an off hand way.... 1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core.
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
