[Ray Cox]

any one interested in a group purchase on a custom bent molly cage for a 2nd gen TA? cost would probably start at 500 depending on how many points you need. we are getting ready to put 2 in here then take them to a shop to have tig welded. the shop is qouting 4-500 to weld up the entire car , including frame connectors, motormounts and stuff

a general 12 pint cage is going to cost you 190.00 per point to have it done, doing it your self you would be around 1,000.00

we are demensining my cage to have these bent from, anyone who has seen it knows how tightly it fits the car, less than an inch from the dash, and less than 1/4 " from the winshild
anyone interested let me know we would hope to put the order in within 1-2 weeks

the same shop might do a group purchase on a 9" rearend kit as well

they already do the front nose supports like I have ill try to put some photos up

[Ray Cox]

any one interested in a group purchase on a custom bent molly cage for a 2nd gen TA? cost would probably start at 500 depending on how many points you need. we are getting ready to put 2 in here then take them to a shop to have tig welded. the shop is qouting 4-500 to weld up the entire car , including frame connectors, motormounts and stuff

a general 12 pint cage is going to cost you 190.00 per point to have it done, doing it your self you would be around 1,000.00

we are demensining my cage to have these bent from, anyone who has seen it knows how tightly it fits the car, less than an inch from the dash, and less than 1/4 " from the winshild
anyone interested let me know we would hope to put the order in within 1-2 weeks

the same shop might do a group purchase on a 9" rearend kit as well

they already do the front nose supports like I have ill try to put some photos up

[Chopper]

Yes!! I would be very interested. Do you know if it would come notched?

[Chopper]

Ray, when you say starting at $500.00 is that a 6, 8, 10, or 12 point? I am wanting to do a 25.5 cage in mine. But, I would like to atleast start off with a well bent 12 point, the rest of the stuff won't be that difficult to get.

[Ray Cox]

I think for the 25.5 it would be around 7-8 for all the tubes, but you would have to do the notching and fitting, but the basic 12 point would be all bent and probably the funny car cage also

[Region Warrior]

put me down for one. do you need front $$$?

[Young One79TA]

How much for a 10 pt. setup? Need to know if I can get the money in time. (Being 20 and in college sucks when it comes to $$$.)

Marshall.

[Brian Baker]

Don't forget about shipping, which ain't gonna' be cheap.

[Chopper]

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Ray Cox:
I think for the 25.5 it would be around 7-8 for all the tubes, but you would have to do the notching and fitting, but the basic 12 point would be all bent and probably the funny car cage also <HR></BLOCKQUOTE>

When can you find out for sure how much for the 25.5? The notching isn't a problem, I just need it bent. Also where would it be shipped from? Are you going to have a 25.5 made for yours?

[Ray Cox]

Brians right shipping can be high, unless I bring it to a race if Im at one in your area,

we are in the process of measuring the cage up now, and they said a few days for the quate once they have the dimmensions my gusee is money would be needed by mid to late feb.

[Formula400NYC]

Ray can you post some more info on your front nose support.Maybe some pics.Thanks........Jerry

[Ray Cox]

nose

[Ray Cox]

nose2

[Formula400NYC]

Very nice, Ray. Is that a custom piece or can I purchase that some where?

[Ray Cox]

they hafe the demiensions, so they can sell it to you but it needs to be fit to the car so you might have to customize it a little after you get it

[Chopper]

Any updates on when and how much for the cages?

[Chopper]

updates???