| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
06-24-2003, 11:14 PM
|
|||
|
|||
Hello Everyone, My stock speedometer cable from the original 2 speed automatic transmission does not fully go in to the plastic gear on the late model TH350 automatic transmission I just put in my 1966 GTO. Since it doesn't seat down all the way into the plastic shaft I can't screw the cap on the threaded part of the piece that goes on the case. Do I need a TH350 cable? A different plastic gear or what? The gear that's in there now is orange and has 35 teeth. I'm running 15 inch rims, 60 series tires and 3:08 rear gears.
Any suggestions?...Gary |
|
#2
06-24-2003, 11:14 PM
|
|||
|
|||
|
Hello Everyone, My stock speedometer cable from the original 2 speed automatic transmission does not fully go in to the plastic gear on the late model TH350 automatic transmission I just put in my 1966 GTO. Since it doesn't seat down all the way into the plastic shaft I can't screw the cap on the threaded part of the piece that goes on the case. Do I need a TH350 cable? A different plastic gear or what? The gear that's in there now is orange and has 35 teeth. I'm running 15 inch rims, 60 series tires and 3:08 rear gears.
Any suggestions?...Gary |
|
#3
06-27-2003, 07:08 PM
|
|||
|
|||
|
The end of the gear must be messed up cause if u go to buy a cable u will get the same cable for all the 4 speeds 3 speeds and the 2 speed auto's and the 350 and 400's. Pull the gear out of the transmission and either replace the gear or rework it to fit.
DRIVE IT LIKE U STOLE IT! connman
__________________
connman |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
