[68conv.bird]

I purchased a 68 firebird conv. in boxes. I have all the parts needed to re-assemble, including new fenders, radiator support, inner fenders, bumper, etc. Can anyone give me a heads up on what the easiest order would be to put it together since I didn't get to see it get torn down? Also, would you recommend putting those round anti-vibration tubes back in all four corners or not. The front ones are rotted pretty good ( the brackets). I want to fit everything before I paint all the parts.
I would think the radiator support, the inner fenders and brackets, the fenders, the headlight hardware, front bumper supports, and then all misc. brackets.
Any suggestions would be appreciated.

[68conv.bird]

I purchased a 68 firebird conv. in boxes. I have all the parts needed to re-assemble, including new fenders, radiator support, inner fenders, bumper, etc. Can anyone give me a heads up on what the easiest order would be to put it together since I didn't get to see it get torn down? Also, would you recommend putting those round anti-vibration tubes back in all four corners or not. The front ones are rotted pretty good ( the brackets). I want to fit everything before I paint all the parts.
I would think the radiator support, the inner fenders and brackets, the fenders, the headlight hardware, front bumper supports, and then all misc. brackets.
Any suggestions would be appreciated.

[jetallman]

I have 2 68 convertables that are being disassembled now if you need any pics of front end let me know. One is together on my parts car and can be seen very well[email protected]

[68conv.bird]

Thanks for the offer. I sent you an e-mail.