| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
12-16-2004, 12:59 PM
|
|||
|
|||
I need to replace the lower ball joints on my Cat but cant seem to find a local parts store that will carry them.
 DOes anyone know if these are interchangeable with other year Pontiacs, say 1971?? Looks like thats the oldest i can get without going online ang waiting/paying for shipping. Thanks everyone!
|
|
#2
12-16-2004, 12:59 PM
|
|||
|
|||
|
I need to replace the lower ball joints on my Cat but cant seem to find a local parts store that will carry them.
DOes anyone know if these are interchangeable with other year Pontiacs, say 1971?? Looks like thats the oldest i can get without going online ang waiting/paying for shipping. Thanks everyone!
|
|
#3
12-16-2004, 02:07 PM
|
|||
|
|||
|
The 65 Lower Ball joints are discontinued from just about any source, You are only going to find them on the Web, NOS, or in one of the Kits from the aftermarket warehouses like Kanter. Kanter has them in a kit, not sure if they sell individual Ball Joints.
I had to buy mine from a Parts House outside of Cleveland OH, that deals in 1980 and older cars, They found some NOS pieces for me. A&D Autoparts 440-237-9300. Good luck on your search. |
|
#4
12-16-2004, 05:37 PM
|
|||
|
|||
|
Have you tried a NAPA store? They had everything I needed to rebuild the front suspension on a 68 Catalina.
|
|
#5
12-17-2004, 07:47 AM
|
|||
|
|||
|
not available at any local auto store.
|
|
#6
12-17-2004, 10:23 AM
|
|||
|
|||
|
Just pulled up Advance Auto Parts. They list them for $67.77 each in Rare Parts #10168. Tim in NC.
|
|
#7
12-17-2004, 03:21 PM
|
|||
|
|||
|
You guys are right, they are not available anywhere!!
I think im going with the Rare Parts, i found out they are out of Stockton wich is about an 70 miles from me, they said they can ship and have then here by tomorrow. Thanks for your suggestions. 
|
|
#8
12-17-2004, 04:44 PM
|
||||
|
||||
|
I had to get mine from Kanter as well. No one in Chgo area had them. I was surprised since a ball joint is pretty common.
__________________
GTO's and Firebirds? Only if you're weak at heart. Join the DARKSIDE!!! |
|
#9
12-18-2004, 08:41 AM
|
||||
|
||||
|
I re-built the entire front end on my '63 GP and used a combination of parts from Kanter, Ames, PPY, Checker, Ebay, and Autozone. I do admit that it did take a while to get all the parts together but she rides sweet.
Mike |
|
#10
12-29-2004, 07:04 PM
|
||||
|
||||
|
I also got parts for my 65 on the web. Bushings are easy. Most parts stores should be able to get them since Moog still makes them. I got tie rod ends and ball joints from various sellers on ebay. My uppers are NOS GM, and the lowers are OEM TRW's...or vise versa. Anyway, there're all new, and fit like a glove. If you're not hellbent on getting them ASAP, wait and buy them on ebay. They come up for sale often, plus, you'll save a substantial amount of cash. $70 per ball joint? That's a rip. I think mine were about $20 a piece when all was said and done!
|
|
#11
12-29-2004, 08:34 PM
|
||||
|
||||
|
I am actually still listed as a vender at rare parts. I've had my best luck with them.
__________________
Try calling CRUSHPROOF! 512-386-9889 |
|
#12
12-30-2004, 02:14 PM
|
|||
|
|||
|
FWIW-Some of the mid 60s big Buick guys have bought Kantor ball joints and found them to be offshore products. The walls of the ball joint housing were thinner than the old stock Moog, TRW, ect. One of the guys recently had a failure on one of those where the ball pulled out of the cracked/broken base. Luckily, he was going slow-but not a good situation.
__________________
mostly Buicks/Pontiacs |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
