| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
06-01-2004, 07:09 AM
|
||||
|
||||
I saved a set of Front Seat belts, lap and shoulder from a 75 formula I parted but didn't save the female sides and never checked to this weekend. The current lap only belts ( previous owners removed shoulder belts from car and cut them them off the lap belt connector) won't buckle to them and the drivers side female side is broke anyways. Thought 74 and 75 were the same or somebody swapped them. What belts are interchangeable or Should I just look for a complete set to save my self some aggravation.
__________________
74 Formula Below motor destroyed fall of 2023 469, 6X-4's, 72 Intake, Ramair Manifolds. 3 inch exhaust with x-pipe Custom Roller Cam, 1.52 Roller Rockers Quadrajet done by Cliff 3:42 gears 12.061 @ 110.74 12.092 @ 112.43 12.128 @ 111.71 461 stroker Edelbrock 87 cc dport heads Performer RPM Same Ram Air manifolds, and quadrajet 75 Formula 400 / 4-SPD matching numbers 
|
|
#2
06-01-2004, 07:09 AM
|
||||
|
||||
|
I saved a set of Front Seat belts, lap and shoulder from a 75 formula I parted but didn't save the female sides and never checked to this weekend. The current lap only belts ( previous owners removed shoulder belts from car and cut them them off the lap belt connector) won't buckle to them and the drivers side female side is broke anyways. Thought 74 and 75 were the same or somebody swapped them. What belts are interchangeable or Should I just look for a complete set to save my self some aggravation.
__________________
74 Formula Below motor destroyed fall of 2023 469, 6X-4's, 72 Intake, Ramair Manifolds. 3 inch exhaust with x-pipe Custom Roller Cam, 1.52 Roller Rockers Quadrajet done by Cliff 3:42 gears 12.061 @ 110.74 12.092 @ 112.43 12.128 @ 111.71 461 stroker Edelbrock 87 cc dport heads Performer RPM Same Ram Air manifolds, and quadrajet 75 Formula 400 / 4-SPD matching numbers
|
|
#3
06-01-2004, 01:47 PM
|
|||
|
|||
|
I may be interested in the belt if you decide to get rid of it.
please let me know what you decide. Don [email protected]
__________________
some times when you race with squirrels you get your nuts cracked! |
|
#4
06-03-2004, 04:39 AM
|
|||
|
|||
|
I'm not sure when the changeover was, but I found that my 74 TA has the smaller buckles than late model second generations. I bought another set of matching belts off ebay.
BTW, the rears are also special in that you need the retractors that have a top mount and not the side mount! Trumpeter |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
