| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
Need some help choosing a good Cam
My Plans are to keep the motor in lower RPM range, do to stock Rod Bolts, i dont really know there limit. 400ci w/ compression somewhere just over 8.1:1 th350 3.08 Rear, which i plan to bump up to 3.23 or little higher P295/50R15 Tires the cam i was thinking of getting is the Crane Powermax H-272-2 which has a Adv of 272/284 Any suggestions are greatly apreciated!! |
|
#2
|
|||
|
|||
|
Need some help choosing a good Cam
My Plans are to keep the motor in lower RPM range, do to stock Rod Bolts, i dont really know there limit. 400ci w/ compression somewhere just over 8.1:1 th350 3.08 Rear, which i plan to bump up to 3.23 or little higher P295/50R15 Tires the cam i was thinking of getting is the Crane Powermax H-272-2 which has a Adv of 272/284 Any suggestions are greatly apreciated!! |
|
#3
|
||||
|
||||
|
I have that cam in my 400. It has #48 heads, with somewhat more compression than yours though. Nearly smooth idle and good vacuum for power stuff.
__________________
frittering and wasting the hours in an off hand way.... 1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core.
|
|
#4
|
|||
|
|||
|
Or Summit's K2801 would also be a good choice...Robert
|
|
#5
|
|||
|
|||
|
Look at a Comp XE262, works good w/low compression, good idle, no flat spots in power up to 4800rpm, works good in my 79 TA 400 4spd, 3.23.
|
|
#6
|
||||
|
||||
|
Crower 60240
270/276 advertised 210/221 @ .050, .422/.446" lift.
__________________
1964 Tempest Coupe LS3/4L70E/3.42 1964 Le Mans Convertible 421 HO/TH350/3.08 2002 WS6 Convertible LS1/4L60E/3.23 1966 VW Type 2 Single Cab Pickup 140hp 2276 1956 VW Type 2 Panel Van 36hp 1200 1957 VW Type 1 Beetle 180hp 2276 |
| Reply |
|
|