| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#21
05-13-2005, 08:15 AM
|
||||
|
||||
I ran a B&M Holeshot 2400 for years w/ a mild 400 buildup. Great street manners. I'm not sure about the B&M Tork-Master, never used one.
__________________
|
|
#22
05-13-2005, 01:26 PM
|
||||
|
||||
|
do you still know what your build up was?
__________________
463 Stroker Kit. ross pistons. h beam rods. eagle crank. 62 heads 72cc, port matched Performer RPM-850DP Auburn- 3.55 gear CC HR custom grind |
|
#23
05-13-2005, 01:54 PM
|
||||
|
||||
|
.030 over 400, trw flattop pistons, torker II intake, 6X heads (little if any work to the heads), holley 750 DP, lunati hydraulic (can't find the cam in their catalog anymore but it was a single pattern 225 or 235 dur. @ .050, .507 lift), 3 tube headers, 3" exhaust in a 67 firebird, best I could get it was 13.54 ET @ 99.7 MPH w/ 1.88 60 ft time.
__________________
|
|
#24
05-13-2005, 03:21 PM
|
||||
|
||||
|
you seem to have a good set up and all you got was 13.50's damn i should get ready to spend a lot of money.
__________________
463 Stroker Kit. ross pistons. h beam rods. eagle crank. 62 heads 72cc, port matched Performer RPM-850DP Auburn- 3.55 gear CC HR custom grind |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
