| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
02-15-2005, 06:50 PM
|
|||
|
|||
I have a 64 Lemans with a 400. I want to block off the ports on the heads that feed the heat riser { both heads }. Any ideas? Merlin
|
|
#2
02-15-2005, 06:50 PM
|
|||
|
|||
|
I have a 64 Lemans with a 400. I want to block off the ports on the heads that feed the heat riser { both heads }. Any ideas? Merlin
|
|
#3
02-16-2005, 11:01 AM
|
|||
|
|||
|
Felpro 1233 intake set has optional block-offs. The best way is to fill the passages with aluminum.
|
|
#4
02-16-2005, 07:17 PM
|
|||
|
|||
|
Mr. P-Body, Should I use the aluminum with the gasket or by it's self? Merlin
|
|
#5
02-17-2005, 07:03 AM
|
|||
|
|||
|
If you fill the passages, you won't need the block-off that comes with the gaskets. If your ports aren't raised to Ram Air IV height, you could use a standard gasket with the filled heads.
|
|
#6
02-17-2005, 08:56 PM
|
|||
|
|||
|
Mr. P-Body, I thought you wanted me to use aluminum sheet stock or the gasket, I was confused. That happens alot at my age. Thanks aloy for your help. Merlin
|
|
#7
02-18-2005, 02:17 PM
|
||||
|
||||
|
Hey Gordo!
The method Mr. P-body is describing involves removing the heads to have them filled with molten aluminum. Have you purchsed your gaskets yet? Shoot me a mail or give me a call to discuss. Talk to you soon, Kev
__________________
Kevin Swaney Tin Indian Performance Rear Engine Dragster 7.66 @ 172 mph 494 with KRE High Port Heads  www.tinindianperformance.com 330-699-1358 |
|
#8
02-26-2005, 08:28 AM
|
|||
|
|||
|
Kev, I'll call you at home. Again I want to thank Mr.P-Body for his help. Merlin, over and out
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
