[Tim Swain]

Jim Taylor and Nunzi generally use the same pump, Sealed Power 60psi # 224-113R. Nunzi told me he started sending back hundreds of them. He won't even open the box, just send them back as defective, till they asked him why. He got there attention and they started inspecting there pumps for burrs, pits, dirt ect. Both Jim and Nunzi inspect there pumps BUT they have a lot less problems since Nunzi's Boston tea party.

[Tim Swain]

Posted by Goatman
"Not everyone can or will do these things, but they all should. Its just good sense. I pay Indain Adventures to do my motors because of things like this and 1000's more that I don't know about. I'm sure you are in the same boat with a majority of your customers."

Your talking to Ken Keefer, a grown man, who has had more experience since he took a dump this morning than you have since you were born!

Goatman you haven't checked didly on your motor!

Goatman read your quote, then say "Sorry Mr. Keefer, I don't know what I'm talking about."
I apoligize to the rest of the board and promise I will not respond to, you know who. Sorry folks.

[ June 09, 2002, 01:03 AM: Message edited by: Tim Swain ]

[Goatman]

Tim, hold your breath, my appology is coming............

Since you still haven't been watching, I'll tell you this isn't the first motor I have put together, nor assisted in putting togehter. I have done a couple street motors for MY cars that I drove, EVERYDAY. Pontiac race motors are slightly more tricky, something you don't know about, obviously, by your own admisions and ignorant statements.

Nice try, but if you're lokking to "get me back", you'll have to try harder and be more prepared. This sissy swing you just took hit nothing but hot air.

[ June 09, 2002, 11:13 AM: Message edited by: Goatman ]

[dyingbreed]

Just as things were starting to calm down..... well, here we go again!!!

db

[Goatman]

Yup, seems some want to go into the revenge business. Too bad they can't get the job done.