| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
06-16-2002, 11:33 PM
|
|||
|
|||
how hard is this to do, i am considering pulling to try and keep cooler, 400/auto, air has been removed.
|
|
#2
06-16-2002, 11:33 PM
|
|||
|
|||
|
how hard is this to do, i am considering pulling to try and keep cooler, 400/auto, air has been removed.
|
|
#3
06-17-2002, 09:59 PM
|
||||
|
||||
|
not too difficult, you will have to pull the rad. and the rad shroud, then you will have to unbolt the condensor from the rad support(and any hoses ect...), gaining access from the top of and through the rad support , the condensor will come out in the same direction as the rad, strongly recommend removing the fan so you dont damage the rad. or the cond. if there is no debris inbetween the rad and cond,( blow it out with compressed air anyway) I would not worry about pulling the cond. out, your car should run at optimum ( normal) temp even with the cond. in
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
