[karl emerick]

I have the 67 service manual and the 67 fisher body manual.
contains some info:
1) A-body power window circuit schematic - all A-body
the circuit contains:
a) circuit breaker
b) relay
2) diagram of 'front end power window wiring - A-body'
the relay runs off the 'cross -over wire harness' that goes between the
left and right front door wiring. the relay must run off the ignition
'on' circuit.

I need to know:
1)where does the power feed originate to activate the relay?
2) what kind of relay and where is it mounted?
3) what kind of circuit breaker and where is it mounted?

[karl emerick]

I have the 67 service manual and the 67 fisher body manual.
contains some info:
1) A-body power window circuit schematic - all A-body
the circuit contains:
a) circuit breaker
b) relay
2) diagram of 'front end power window wiring - A-body'
the relay runs off the 'cross -over wire harness' that goes between the
left and right front door wiring. the relay must run off the ignition
'on' circuit.

I need to know:
1)where does the power feed originate to activate the relay?
2) what kind of relay and where is it mounted?
3) what kind of circuit breaker and where is it mounted?

[blue67gtoragtop]

My 67 conv has pw. I'll try to look and see what I can find out.
Ken

[karl emerick]

I would appreciate any help. I hate to 'jury-rig'
the system. I did direct wire the main feed to the windows to get them to work for assembly fitting, etc. but the 'FINAL ASSEMBLY ' I would like to be as correct as possible.
thanks for the offer.

[karl emerick]

someone was nice enough to email me directly and remind me that the assembly manual has information to hook up the system. the relay mounts to the parking brake bracket and the breaker is the main accessory brealer under the hood. finished mine last night. anyone needs additional info let me know. thanks for the help. karl

[ April 06, 2002: Message edited by: karl emerick ]</p>