Pontiac - Race The next Level

          
Reply
 
Thread Tools Display Modes
  #1  
Old 01-25-2005, 07:01 PM
gobrdgo gobrdgo is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: Southern California
Posts: 625
Default

I just got the new 3.73 (was 3.31) rear in my bird and was doing some on ramp testing last night, I should of called it quits after one test but I had to do it one more time. Blame my inexperience, (I'll blame the shifter) regardless I hit neutral when I wanted second and she banged on the 7000 rpm pill and she gave up the ghost. I shut it down immediately and towed it home, Keep your fingers crossed it's just a bearing clanging around in there. I'll keep you posted on what failed when I get it apart. The good news, the 3.73's seemed to make a world of difference!

  #2  
Old 01-25-2005, 07:01 PM
gobrdgo gobrdgo is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: Southern California
Posts: 625
Default

I just got the new 3.73 (was 3.31) rear in my bird and was doing some on ramp testing last night, I should of called it quits after one test but I had to do it one more time. Blame my inexperience, (I'll blame the shifter) regardless I hit neutral when I wanted second and she banged on the 7000 rpm pill and she gave up the ghost. I shut it down immediately and towed it home, Keep your fingers crossed it's just a bearing clanging around in there. I'll keep you posted on what failed when I get it apart. The good news, the 3.73's seemed to make a world of difference!

  #3  
Old 01-25-2005, 07:10 PM
goatless's Avatar
goatless goatless is offline
Ultimate Warrior
 
Join Date: Nov 2002
Location: Newtown,CT
Posts: 4,592
Default

D'OH!!!!

__________________
1966 GTO
1969 Lemans Convertible- F.A.S.T. legal family cruiser. 12.59 on G70-14 Polyglas tires. 1.78 60'
1969 Bonneville Safari- cross country family cruiser. .
1979 Trans Am 400, 4-speed, 4 wheel disc.

View from the drivers seat racing down Atco Raceway- http://www.youtube.com/watch?v=GhYDMdOEC7A

Ride along in the other lane-http://www.youtube.com/watch?v=mIzgpLtF_uw
  #4  
Old 01-26-2005, 06:46 AM
Half-Inch Stud's Avatar
Half-Inch Stud Half-Inch Stud is offline
Ultimate Warrior
 
Join Date: Jul 2000
Location: BlueBell, PA or AL U.S.A.
Posts: 18,890
Default

Cheap bet that a pushrod or rocker arm gave up.

I'm miffed at why the 68 Dual-Gate & 69 GM Ratchet reach Neutral while going for 2nd. I'm convinced that "adjustment for Cable stretch" is not the issue.

Soooo, I think the Shifters need close attention to an internal offset, to achieve the best feel.

Hey, I went column-shift based on your gripe!
HIS

__________________
95 Towncar that needs more TQ.
Sold 2023: 12.24/111.6MPH/1.76 60'/28"/3.54:1/SP-TH400/469 R96A/236-244-112LC/1050&TorkerI//3850Lbs//15MPG/89oct
Sold 2003: 12.00/112MPH/1.61 60'/26"x3.31:1/10"/469 #48/245-255-110LSA/Q-Jet-Torker/3650Lbs//18MPG 94oct
Sold 1994: 11.00/123MPH/1.50 60'/29.5"x4.10:1/10"/469 #48/245-255-110LSA/Dual600s-Wenzler/3250Lbs//94oct
  #5  
Old 01-26-2005, 12:23 PM
Bababooey Bababooey is offline
Junior Member
 
Join Date: Nov 2003
Location: South Haven, MI
Posts: 15
Default

Been there, done that. I'm not sure what RPM I was at, I was pulling a hole shot trying to impress a girl, missed 3rd, and flew right to N. I ended up breaking #8 rocker arm stud, and breaking and bending the exhaust and intake pushrods on #8 also. Luckily I was able to find all the pieces. It had the stock bottleneck studs anyhoo, so I just upgraded to the 7/16" straight studs.

Here's to hoping that's the only problem.

Brandon

  #6  
Old 01-26-2005, 12:42 PM
johnta1's Avatar
johnta1 johnta1 is offline
Ultimate Warrior
 
Join Date: Feb 2001
Location: now sunny Florida!
Posts: 22,516
Default

I thought with automatics, the object was to have your right hand occupied by other things than using the shifter?

__________________
John Wallace - johnta1
Pontiac Power RULES !!!
www.wallaceracing.com

Winner of Top Class at Pontiac Nationals, 2004 Cordova
Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats

KRE's MR-1 - 1st 5 second Pontiac block ever!

W.E.C moment


"Every man has a right to his own opinion, but no man has a right to be wrong in his facts."

"People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates
  #7  
Old 01-26-2005, 01:48 PM
gobrdgo gobrdgo is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: Southern California
Posts: 625
Default

Baseline inspection shows no broken rockers, valve springs look good and everything moves freely. I need to finish getting the engine out so I can check the bearings. I'll keep you posted. The "car craft spring break anti tour" is on the 19th of March, a six hour drive with drags in phoenix, I WANT to be there so BAD!!!
Thanks for your support. I bought a nitrous setup too, still in the box. LOL

  #8  
Old 01-26-2005, 06:43 PM
Bababooey Bababooey is offline
Junior Member
 
Join Date: Nov 2003
Location: South Haven, MI
Posts: 15
Default

LOL, I hadn't gotten to that point with her yet John. I figured a nice, black, smokey burnout would seal the deal........it did.

Luckily, I was next to the house when it happened. I played off the knocking noise as something minor.

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:28 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017