[kkey]

Just wondering who visits this board?
How about everyone listing the year, motor, trans,and other vital stats of their T/A?
Also leave a link to any web sites.
I have a 1978 T/A with a 400 running a Summit 272/282 cam ,'72 intake, Summit headers, Turbo 350 (soon to be 200-4r), and 3.23 gears.

------------------
The Pontiac Trans Am Page

[kkey]

Just wondering who visits this board?
How about everyone listing the year, motor, trans,and other vital stats of their T/A?
Also leave a link to any web sites.
I have a 1978 T/A with a 400 running a Summit 272/282 cam ,'72 intake, Summit headers, Turbo 350 (soon to be 200-4r), and 3.23 gears.

------------------
The Pontiac Trans Am Page

[bs78ta]

I have a 78 TA also. Currently running a .030 over 400, CC 270 cam, RA3 exhaust with 4speed and 3.23 gears.Ran best of 14.7 @94mph-2.8 60' time last season. No traction with the standard. This winter I am refitting it with a 455 and TH400. Hope for better track results if I can get it to stick.

[Tim David]

I have a 79 T/A 10th Anniversary.
400cid. 4-speed. putting the engine together
now. 068 cam. .030 over. balanced. 1970
intake and carb.Complete rebuild.
Doing a full restoration.

Thanks,
Tim

[Bill Boyle]

'79 TA 6.6/TA with all the amenities. Original owner. http://www.boyleworks.com/ta400/musclecar.html

[Bob W]

I have a 79 T/a with a 301,four speed, and
T-tops.Needs alot of work,saved it from going to the junk yard.

[Tim642957]

1980 Trans Am, automatic with t-tops, all original except for paint. Drove home from the dealership with it on January 6, 1980.

[Trevor Jordan]

79 TA, black with t.roofs. Original Pontiac 400 4 speed car now with Borg Warner T56 6 speed. Holley 750 Double Pumper on Edelbrock Performer intake. RAIII type exhaust manifolds with full length 3" Torque Tech exhaust system, Flowmaster mufflers. Vintage Air HVAC. Car ran best 1/4 mile of 14.13 @ 101mph and cruises 70mph @ 1800 rpm. Will pull from 35mph in sixth gear due to engines excellent torque.

[tikler]

I have a 79 T/A w/301 auto. I've re-done most of the interior now and almost ready to start on the '74 400 I've got on the engine stand. Anybody know if the front springs are rated the same for the two engines? After the driveline is what I want it to be it will be off to the body shop. Car is blk w/camel interior. 11-04-01 well i've been busy. she now has a 400, bwst10 4-spd, full ws-6 suspension, numerous options added-on and getting ready for paint(black of course)

[This message has been edited by tikler (edited 11-04-2001).]

[David Holmberg]

77 T/A with a 462, Ported 6x heads, 4-Speed, 3.42, W-S6 wheels, basic street car. 1978 Gold Special Ed T/A, still in the building stage, 10 sec strip toy when done.

[Larry Navarro]

1979 t/a special edition bandit, 400/4 speed,
with transplanted '72 455HO. more info: http://www.boyleworks.com/ta400/psp/rebuild455ln.html

[David]

I got two 10th anniversary Trans ams. One only has 34,000 miles on her.(by the way it's for sale). The other is waiting to be restored. Also have a 79 400 4 speed with the WS6 package. It is currently under going a complete resto for a daily driver.

[kkey]

Hey Trevor,
How hard was it to get the six speed in there?

------------------
The Pontiac Trans Am Page

[Old Man Taylor]

I have to describe a "useta have". It was a '78 Gold Special Edition, W72 4-speed car with a 3.42 posi. The Q-Jet was reworked and the cat was bypassed. I didn't take it to the track, but from street comparisions it was probably about 14.4s at 95 mph. The drive train was stock. From a 30 mph roll it had a hard time pulling away from my '68 Catalina wagon. I built a 428 for that and added a '65 tri-power.

------------------
Jim

[Larry Navarro]

another from the stable.
'73 SD455 T/A. follow the link for more. http://www.boyleworks.com/ta400/psp/superduty.html

[Steve C.]

1970 T/A-limited street/10.79 ET @3790 race weight. Specifications contained on website listed in profile.
More info at: www.geocities.com/MotorCity/Boulevard/6816/garage/steve/steves70ta.html

[Cruiser]

3-79s& 1-80
Fastest(So Far)-79 T/A Street legal 455,Ross Pistons, Eagle Rods,Forged 4-Bolt Mains,Edelbrock heads,Ultradyne Roller,Victor Jr,Dominator,Crane Ignition,6 pt.cage,flowmaster 3"exhaust system A-1 turbo 350,Tranny brake,10 bolt w/Auburn Pro Pos,Strange axles,C-clip elim,ultimate cover W/brace.3600 lbs.Times-10.31@130 1.49 60 ft.
CURRENT PROJECT:80 T/A Street legal 455,Crower Rods,Forged 4 Bolt Mains,Ross Pistons,Hard Blocked.Ported 760 heads,Ferreea Valves,Stud girdle, Ultradyne Roller,Warrior intake, ,Holley 850 Annular,Crane Ignition,6 pt.cage,flowmaster 3"exhaust system A-1 turbo 350,10 bolt w/Auburn Pro Pos,Strange axles,C-clip elim,ultimate cover I want to run in the foot brake class& drive to local cruises.Times ????? I will Let You Know
79 T/A Street 455,Ross Pistons.670 heads,S.S. Valves,Crane Hydrylic Cam,T-Tops Sub frame connectors,Doug Nash 4+1,Super Duty Rods,10 bolt w/Auburn Pro,3.42 Gears,Times:12.80@ 110

[Brian Baker]

79 WS-6, all options except t-tops. Was 403/th350, now 455/th400. 3.23 gears in stock rear. Cameo white exterior with charcoal bird and graphics, oyster white custom interior. Check it out on Bill Boyle's website under the "torque power" section (www.boyleworks.com/ta400)

[77TA]

77 SE TA. It is the first car I ever had so I restored it for the sintamental value. it has 78 style T-tops and has been redone from the ground up. engine will be 455 4 speed with 3.42 rear end. owner painted black paint job.

[Fusion]

I have a 1979 Trans Am
Best run 13.6 @103
here's the link, check it out
http://www.yearone.com/live/carshows...ckel/eckel.htm