| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
10-01-2000, 07:36 PM
|
||||
|
||||
Does anyone know what the idle quality of nunzi cam #2042????????
|
|
#2
10-01-2000, 07:36 PM
|
||||
|
||||
|
Does anyone know what the idle quality of nunzi cam #2042????????
|
|
#3
10-01-2000, 10:45 PM
|
||||
|
||||
|
Ummmmm, no, I am not answering my own question [img]/infopop/emoticons/icon_wink.gif[/img] I can give you all the 2042HL info you need:
301/313 advertised duration 232/243 [email protected] .460/.470 lift @1.5 113 Lobe Separation 109 Centerline 80 degrees overlap 4 degrees advance ground in This cam is not for someone who plans to sneak up on somebody at a stoplight. This cam has a very aggressive lope with a whole lot of streetability. It's amazing how smooth it is. I use this cam in my 76 455 T/A with ported 4X and a host of factory goodies. It offers a ton of low end torque but a lot of top end as well. The car doesn't really idle rough, but it's by no means a smooth sounding cam. If you like the heavy cam sound, then this is for you. If you're not up for that, try the 2041HL. It's very similar in performance, yet it's a little more tolerable. What are you planning on putting it in? If you say a Firethorn Red 1976 T/A 455-4 speed, I'm notifying the proper authorities [img]/infopop/emoticons/icon_wink.gif[/img] [This message has been edited by Rocky Rotella (edited 10-01-2000).] |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
