FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
HELP I need a posi rear for my 69 firebird. i want a 12 bolt but will settle for a 10. I want stock or close to stock gearing. I have a 455 and want to drive it daily.
Thanks for any help. |
#2
|
|||
|
|||
HELP I need a posi rear for my 69 firebird. i want a 12 bolt but will settle for a 10. I want stock or close to stock gearing. I have a 455 and want to drive it daily.
Thanks for any help. |
#3
|
||||
|
||||
Viking, I'm guessing you have the stock 8.2" posi in the car now. If so, hold on for a week. My local rearend guru is going to do a carrier conversion on a friend's 8.2" next week. It is a non-GM carrier, and it is MUCH stronger than any 8.2". I'll give details when I see whether the conversion works or not. stay tuned.
__________________
'73 T/A (clone). Low budget stock headed 8.3:1 455, 222/242 116lsa .443/.435 cam. FAST Sportsman EFI, 315rwhp/385rwtq on 87 octane. 13.12 @103.2, 1.91 60'. '67 Firebird [sold], ; 11.27 @ 119.61, 7.167 @ 96.07, with UD 280/280 (108LSA/ 109 ICL)solid cam. [1.537, 7.233 @93.61, 11.46 @ 115.4 w/ old UD 288/296 108 hydraulic cam] Feb '05 HPP, home-ported "16" D-ports, dished pistons (pump gas only), 3.42 gears, 275/60 DR's, 750DP, T2, full exhaust |
#4
|
|||
|
|||
Viking,
Read my post below on Strong Ten Bolts. It'll direct you to where the original article is. ------------------ John [This message has been edited by JC455 (edited 01-18-2000).]
__________________
John IG: @crawdaddycustoms YouTube: https://www.youtube.com/channel/UCK9...Nc_lk1Q/videos |
Reply |
|
|