FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
rpm intake mods.
HI my intake mods. some pic.
__________________
1978 ,t/a 3660# 455 2010 / 1/8 7.86 1/4 12.40 @ 109,19 http://www.youtube.com/watch?v=6PaHbLnszS0 http://www.youtube.com/watch?v=XMxhM...eature=related 12.01@109 http://www.youtube.com/watch?v=MC-dganA2jQ 100 shot 11.78. A,ll new head cam combo 96 ported bye Mike Chell!! Comp cam yes the 284 XE. Firsthand outing of the street 7.69 1/8 12.15 109.47 hot and humid.not hooking. 1.73 60. |
#2
|
||||
|
||||
That took a little time
__________________
461 Cu. In. Pure Pontiac Power: 1969 Pontiac GTO - Back On Top - Popular Hot Rodding Magazine |
#3
|
||||
|
||||
I'm going to be doing the same thing but with the performer as soon as i get it.....waiting patiently snail mail....................
|
#4
|
||||
|
||||
re.
not to bad . some air tools ,drill , sand paper,patiens.use a drill and small bit 3,or 4 lol.
__________________
1978 ,t/a 3660# 455 2010 / 1/8 7.86 1/4 12.40 @ 109,19 http://www.youtube.com/watch?v=6PaHbLnszS0 http://www.youtube.com/watch?v=XMxhM...eature=related 12.01@109 http://www.youtube.com/watch?v=MC-dganA2jQ 100 shot 11.78. A,ll new head cam combo 96 ported bye Mike Chell!! Comp cam yes the 284 XE. Firsthand outing of the street 7.69 1/8 12.15 109.47 hot and humid.not hooking. 1.73 60. |
#5
|
||||
|
||||
Very nice job!
If you did that all with hand tools then I consider you quite a craftsman! You pic of the crossover passage in the flange is not clear...did you fill the hole? |
#6
|
||||
|
||||
Quote:
I'd like to know about this too and if so what's the technique for that? Looks great! |
#7
|
||||
|
||||
re intake
yes i filled the crossover hole with a small chunk of aluminum from intake that was cut to fit and tap in and j/b. weld. plan to put small thin steel under the gasket on the head side. Also working on aluminum bumper for front.that i am not doing on my own . just met some one that works with aluminum.still in the works not done yet.
__________________
1978 ,t/a 3660# 455 2010 / 1/8 7.86 1/4 12.40 @ 109,19 http://www.youtube.com/watch?v=6PaHbLnszS0 http://www.youtube.com/watch?v=XMxhM...eature=related 12.01@109 http://www.youtube.com/watch?v=MC-dganA2jQ 100 shot 11.78. A,ll new head cam combo 96 ported bye Mike Chell!! Comp cam yes the 284 XE. Firsthand outing of the street 7.69 1/8 12.15 109.47 hot and humid.not hooking. 1.73 60. |
#8
|
|||
|
|||
trying to send a picture, what do you think of mine??
|
#9
|
|||
|
|||
one more try??
|
#10
|
||||
|
||||
Mines kinda tough to see, but same general idea.
__________________
Darin '64 Bonneville Wagon (sold) 69 Lemans-All motor (sold) 9.81 @ 136.39MPH |
#11
|
||||
|
||||
cool
jegtec1 i allso will be putting a 400/455 combo in my t/a have allmost every thing to do it just waiting on some more cash for decking my block 10 thou.off for 0 deck. need about 400 hp to do mid 12.s in my car . street , strip. hope i can get that. 30 over 400 / stan.455. 6x 40 shaved ,rpm intake lanati 230/ 490, 15.2 roller tip . 750 d/p . 373 but may go 323?
__________________
1978 ,t/a 3660# 455 2010 / 1/8 7.86 1/4 12.40 @ 109,19 http://www.youtube.com/watch?v=6PaHbLnszS0 http://www.youtube.com/watch?v=XMxhM...eature=related 12.01@109 http://www.youtube.com/watch?v=MC-dganA2jQ 100 shot 11.78. A,ll new head cam combo 96 ported bye Mike Chell!! Comp cam yes the 284 XE. Firsthand outing of the street 7.69 1/8 12.15 109.47 hot and humid.not hooking. 1.73 60. |
Reply |
|
|