About Us

tommie69 · 02-25-2006, 08:33 AM

I have a 66 gto with its orginal tri power,my quetions is the orginal id tags are not so nice.Should I put repos on ,or will this hurt the car at a points show???And as far as repo tri power items air cleaners,linkage ,ect does any of these take any points away at all?Or are the repo parts the way to go?

carbking · 02-25-2006, 09:17 AM

Assuming that the reproduction parts are exact reproductions of the originals that they replace, points are not usually deducted. In the case of the carb id tags; the originals were ALL color-coded anodized aluminum (beginning about 1961). The aftermarket repro tags that I have seen offered for sale are plain aluminum (uncolored).

Jon.

Jason67 · 02-25-2006, 09:25 AM

Jon, were the color codes the same for all 66 GTO's, or were they different depending upon the options like A/C, 4spd vs. auto, A.I.R., etc?

Would this be correct for a 66 GTO? Green front tag # 7026055, Gold center tag # 7026056 and Black rear tag # 7026057.

Thanks,

carbking · 02-25-2006, 04:07 PM

Quote:

Originally Posted by Jason67

Jon, were the color codes the same for all 66 GTO's, or were they different depending upon the options like A/C, 4spd vs. auto, A.I.R., etc?

Would this be correct for a 66 GTO? Green front tag # 7026055, Gold center tag # 7026056 and Black rear tag # 7026057.

Thanks,

Carburetors have different colored tags by model and year. A 4-speed carb would have a different color than a tag for an automatic. The numbers mentioned are not Pontiac.

Jon.

Jason67 · 02-26-2006, 11:11 AM

Jon, what are the Pontiac colors supposed to be for 66 GTO 4spd and automatic?

The numbers and colors I listed above are Olds tripower. They are being listed on ebay with a buy it now of $155.00. Apparently this guy out of Nebraska is reproducing them and anodizing.

Thanks,

Jason67 · 03-04-2006, 11:55 PM

Can anyone out there answer the question? What are the tag colors supposed to be for 66 manual trans carbs?

Thanks,

Jason67 · 03-08-2006, 04:23 PM

Trade secret or something? Anybody know where the literature would be to find out?

carbking · 03-08-2006, 05:38 PM

Jason - with all due respect, this is a question like the plant codes. I won't give them out. Sorry.

Jon.

Jason67 · 03-10-2006, 07:32 AM

Again, Will someone let me know what the colors are without having to pay them?
I am not sure I understand this at all. If you have a restored set up, and open the hood at a show, aren't you showing everyone what the colors are? Then whats the big secret? I own a 67, my tripower will probably never go on my car. Even if it did, it would NEVER be numbers matching to my car. I find it very frustrating this information is not shared. I share all I can on here if I know it.
So, still looking for front, center, and back 66 tripower carb tag colors for 4spd car.

Tim john · 03-10-2006, 12:06 PM

Jason, I have an original 66 Tri Power and although it is up in the barn loft I seem to remember all the tags being aluminum and in raw aluminum color (light silver) and I do not remeber ever seeing an anodizing on them even twenty five years ago, I can look this weekend at it but I am pretty sure the tags on mine have always been raw aluminum but it easily could have been worn off by handling or fuel, ect...I'll pull one off and check under the fastener, will not be able to post results until Monday though. Tim

squirejohn · 03-10-2006, 12:58 PM

Jason,
I didnt check PY but at Ames, they give the year and the # that is on each tag. I'm sure if you e-mail them they could tell you the colors.
for 66 tripower, manual trans, #'s are; front 7025178. center 7026075. rear 7025179

www.amesperf.com

jarhead · 03-10-2006, 01:55 PM

On 64 tripower they were olive drab, black and a lite gold. Black is in on the center and either gold is in front or the olive drab. The following picture is from my car but I just sold it and it's on the way to Ohio so I can't check.

engineer · 03-10-2006, 02:07 PM

GTO restoration guide has tag numbers for carb. Mine on a 66 setup are all one color.

tom s · 03-10-2006, 03:04 PM

I think Jon is trying to protect his restoration business!The aftermarket guys do sell tags for diff years but they are just clear alu.The fact of having the correct tags seperates the restorer from the rebuilder.JMO,Tom

tommie69 · 03-10-2006, 07:05 PM

I have a 66 tri power and the tags are a different color.I don't have them in front of me now but I wiil look into it!

Jason67 · 03-11-2006, 09:53 AM

I really appreciate the replies here folks, this is excellent. For those that are going to be looking at their cars/parts, please get back to us!

Thanks,

Tim john · 03-13-2006, 07:01 AM

I have looked at my 66 Tri Power unit and under the bolts there is no anodizing left to determine if there was any in the first place so from what I have to look at I have to say that mine (which are original) are raw aluminum. (I may be wrong but nothing points in the other direction). Tim

Jason67 · 03-16-2006, 07:30 AM

Thank you for the reply Tim john. That makes a few originals all raw aluminum. Tommie69, Please look into the colors you have and get back with us. I'm sure there is more than a couple people out here that have colored tags, either original or restored, that could post what colors they have.

Jameaux · 03-17-2006, 12:23 AM

I had a '66 LeMans with a 2BBL and the carb tag was black. This was strange since I believed they were all just aluminum (non colored) tags. (I had a '65 GTO with [non-original] 3x2 induction and they were all aluminum colored -- this was late 70's -- probably before reproduction tags were available.) Please post whatever you find on this subject. Just curious, thanks.

3 Deuce 64 · 03-20-2006, 11:53 AM

well my 64 center carb has a tag with a number on it 7024175 and it aint black or silver it's a bronze / brown color and it has coding on it cain't remember but I think it was B L 48 or something like that but I'll post a pic later

and I have never purchased any repro tags ever . I purchased this 64 in 77

Menu

About Us