Reply
 
Thread Tools Display Modes
  #1  
Old 04-03-2006, 12:13 AM
Bryan Jensen's Avatar
Bryan Jensen Bryan Jensen is offline
On Vacation
 
Join Date: Nov 2004
Location: the Sunny So Cal High Desert
Posts: 646
Send a message via AIM to Bryan Jensen
Arrow Lots of glass questions:

...and I've gotta say it sure is amazing what a simple bottle of glass cleaner can do to getting them looking nice again!

I was very impressed, I thought I'd have to replace everything because of its age, but there are no deep cracks, the reflection is still crisp...

However, they still have some milky "haze" at the bottom or around the weatherstrip edges of the glass, where the window channels were, and there are still a myriad of surface scratches. It's nothing you can see from far away, but in the sunlight it's pretty noticeable.

Like I said, it's good enough I feel it can be restored and cleaned up...and not needing all new glass.

What can I do to get the scratches out..I've heard of glass refinishing or repair kits that literally make it look new again.

Also, a friend of mine looked at them and said any polishing shop could just hit them with a special buff and the milky haze and surface scratches would be long gone?

Ideas??? Opinions? I need to know soon, the car's almost back home from the bodyshop (yay!) and that is probably the next thing I'll be doing. I could even put them back on as is but I'd like to go a step above and get them new-looking again.

Also...I'd like to have these tinted somewhat...only the front windshield is soft ray. What has anyone done on tinting their glass? I'm looking for something decent and gets the job done but doesn't look tacky.

Also, even my front windshield is in cosmetically good condition, just same story...needs the scratches taken out. Is it better to reuse the original or have it replaced? Someone was telling me that it will never have the lustre of a new windshield because those things over time took the brunt of road debris, getting a "sandblasted milky look"

And just out of curiousity, are the pieces that go behind the post on post cars for the back seat....are those post only car pieces? When I looked a little closer they have a stainless piece on them that look like they might be for a hardtop as well. Or was there a different set for hardtops and post cars?

Opinions on that?

Thanks if you can help,
Bryan

  #2  
Old 04-03-2006, 03:10 AM
johnsma22's Avatar
johnsma22 johnsma22 is offline
Ultimate Warrior
 
Join Date: Jun 2005
Location: Taunton, Ma
Posts: 1,928
Default

Hey Bryan, give this stuff from Zaino a try. It is not expensive and it is easy to use. I used it on my door glass for my 76 T/A and it got more of the light to medium scratches out (they only claim that it will remove most light to medium scratches) than I thought it would.

Plus, it removed all the stains and haze on the glass. The only thing it did not touch was the heavier scratches that were caused by the window felts wearing out. I did not expect it would.

Zaino Z-12 Clear-View Glass Polish

John

__________________
John



"There are no stupid questions, but there are a LOT of inquisitive idiots!"
  #3  
Old 04-03-2006, 10:46 AM
lkt1954's Avatar
lkt1954 lkt1954 is offline
Chief Ponti-yacker
 
Join Date: Jul 2004
Location: Dumas,TX
Posts: 548
Default

Bryan:

You might try Spot-X it is sold by a company in washington state and it is excellent. You mix it into a paste and can use a small palm sander with their pads, get's them shiney new and removes small scratches. You can look them up on the internet. When I get the glass in my car I plan on having them tinted (non-a/c car), my tint shop wants all the glass in before they tint.

Hope this helps

Larry

__________________
Get in-Sit Down- Shut Up - Hold On
  #4  
Old 04-03-2006, 12:50 PM
Brad B. Hillebrand's Avatar
Brad B. Hillebrand Brad B. Hillebrand is offline
Ultimate Warrior
 
Join Date: Jan 2003
Posts: 1,861
Default

Eastwood sells a glass polish kit that includes compound and a buff wheel that you attach to a drill. It is supposed to remove any scratches as long as you follow the direction and not generate too much heat. You are not supposed to use it on the green tint tempered glass but the directions don't say that......

Brad

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:37 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017