[BB1968]

68 war dog, It was a local guy. I should have known better, cause he mostly does chebys. There is a guy about 30 miles from here that I am going to take the heads to and have them redone. He has been doing Pontiac stuff for many years. They are 6X-8 heads so I don't want to loose them. Finding Pontiac parts around here is like pulling hens teeth. It is next to impossible. I am 1 of about 5 Pontiac drivers in this area...

PunchT37, I didn't get the torque on any of the head bolts I used an impact wrench to take the bolts out, however I do remember that one of the bolts on the left side was much looser than the others. I didn't have any problems with overheating even in the summer when the outside temp would get to the mid to high 90's.

Thanks to all you guys. I do appreciate the comments...BB