Reply
 
Thread Tools Display Modes
  #1  
Old 08-18-2008, 03:32 PM
Leonard Welch's Avatar
Leonard Welch Leonard Welch is offline
Member
 
Join Date: Jan 2000
Location: Berlin, CT, USA
Posts: 41
Default What's wrong with this door hinge?

Greetings,

I've noticed an issue with my driver-side lower-door hinge. Here's a picture of the 'good' one on my passenger door:

http://pages.cthome.net/lenbo/DSC06202.JPG

Now here's the one on the driver-side:

http://pages.cthome.net/lenbo/DSC06203.JPG

http://pages.cthome.net/lenbo/DSC06204.JPG

I only recently noticed that the top of the pin looks bent. I have had a problem with the driver door not staying all the way open all the time for a while. Now I'm wondering how to correct this. Would this require a door hinge pin, washer or entire door hinge replacement?

Thanks in advance!

  #2  
Old 08-18-2008, 04:58 PM
gloryrestoparts's Avatar
gloryrestoparts gloryrestoparts is offline
Ultimate Warrior
 
Join Date: Jul 2003
Location: Chicago suburbs
Posts: 1,220
Default

looks like the bushing is shot and it's started the wear on the detent and roller. depending on what is bad, it could be just a bushing to completely replacing the lower hinge

__________________
http://gloryrestoparts.20megsfree.com/


1970.5 Pontiac Tempest GT-37
400ci 4bbl 4sp 3.90:1
12.73 @ 112.42 2011 Pure Stock Drags
12.71 @ 110.58 2013 Martin FAST/FS race
12.70 @ 111.74 2014 Pure Stock Drags
12.60 @ 111.66 2015 Martin FAST/FS race

1968 Pontiac Firebird 400
TH400/3.08 open
export car - factory heater delete
14.48 @ 95.86 w/ 2.14 60' 2018 Pure Stock Drags
14.47 @ 95.02 w/ 2.16 60' 2019 Martin FAST/FS race
  #3  
Old 08-18-2008, 08:20 PM
Leonard Welch's Avatar
Leonard Welch Leonard Welch is offline
Member
 
Join Date: Jan 2000
Location: Berlin, CT, USA
Posts: 41
Default

Thanks. Is it possible to take off only the lower hinge? And/or is it possible to only remove the pin in question to replace the bushing without removing the whole hinge?

(Sorry for the questions - I've never removed/rebuilt/replaced hinges.)

  #4  
Old 08-18-2008, 08:33 PM
mike nixon mike nixon is offline
Moderator
 
Join Date: Dec 1999
Location: PORTLAND,IN,47371
Posts: 12,322
Default

Yes it's possible to remove only one hinge. you'll need a floor jack to do it tho. A block of wood and a towell to keep from damaging the paint isn't a bad idea either.

Do the hinge in a vise.

Mike

__________________
so many pontiacs, so little time..................


moderator is a glorified word for an unappreciated prick..................


"Only two things are infinite, the universe and human stupidity, and I'm not sure about the
former." --Albert Einstein



"There is no such thing as a good tax."

"We contend that for a nation to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle."

- Winston Churchill
  #5  
Old 08-18-2008, 09:07 PM
wytnyt's Avatar
wytnyt wytnyt is offline
Ultimate Warrior
 
Join Date: Jun 2008
Location: Roanoke Va.
Posts: 1,654
Default

door pin and bushings but if bushings have been bad long enough,,may need hinge

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:32 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017