[Bluethunder1975]

Originally Posted by Ollie

Thanks, Bluethunder.

That gives me ideas for my set up.

Is the sender compatible with the 2nd gen gague?

No problem.. I have 100s of pics from my nut and bolt rebuild.

As far as mods go, it was pretty easy. Probably took an afternoon. The sender was from a late 80s firebird v6 with multiport. I replaced the old pump with a new walbro 255lph.

Once I was done, I plugged off the other lines, and pumped 10psi shop air in, and leak checked the tank. Had a few pin holes that needed some attention.

Yes, the sender is a 0 to 90ohm, which is the same as the one in my 80. I'm not sure about other years though