Reply
 
Thread Tools Display Modes
  #1  
Old 06-30-2010, 12:30 AM
70ram4 70ram4 is offline
Chief Ponti-yacker
 
Join Date: Jun 2004
Location: watchung NJ
Posts: 547
Default 1969/69 hideaways

I have a 69 that I want to convert over to a hideawy set up. There is a local guy with a 68 setup, forgive me for sounding ignant but is there ANY difference between a 68 to 69 setup, would a 68 be right for my 69? I mean ANYTHING at all, I hate buying stuff twice, thanks for your help?

  #2  
Old 06-30-2010, 01:01 AM
codyyy's Avatar
codyyy codyyy is offline
Chief Ponti-yacker
 
Join Date: Mar 2007
Posts: 655
Default

Isn't the '68 a little different aesthetically as far as the grilles go? I thought '69 has a bar going through the middle of the grille and headlights, but I could be wrong.

  #3  
Old 06-30-2010, 07:00 AM
70ram4 70ram4 is offline
Chief Ponti-yacker
 
Join Date: Jun 2004
Location: watchung NJ
Posts: 547
Default

Ok Thanks so its just the grills right nothing to do with the endura, or mechainism or doors underneath then?

  #4  
Old 06-30-2010, 08:19 AM
madtexan's Avatar
madtexan madtexan is offline
Senior Member
 
Join Date: Oct 2003
Location: Richardson, Tx, Good old USA
Posts: 206
Default

The 68 endura has a hole in the top center where a Pontiac Arrow emblem mounts and the 69 does not. It can be filled when repainting though. Mechanically they are the same and can be moved from a 68 to 69 and visa versa. Like already mentioned the inner and outer plastic grills are different looking.

Be sure to get the bumper mounting brackets from the Hideaway bumper since it is cut with a hole that the mechanism travels thru..... the non-hideaway brackets do not have that hole. You can drill holes in the non-hideaway bracket if needed but it's a large hole and thick hardened frame steel.

My 69 has a 68 hideaway setup on it but I decided to leave the hole for the arrow emblem in place since I liked the way it looked...

  #5  
Old 06-30-2010, 08:53 AM
steve v's Avatar
steve v steve v is offline
Ultimate Warrior
 
Join Date: Apr 2003
Location: Raleigh, NC
Posts: 2,655
Default

The only differences that I've seen from 68-69 is the already mentioned Pontiac emblem on the top center & the grills.

The bumper to frame brackets are different from hideaway to exposed headlights set ups so be sure to get those when buying a conversion. The hideaway brackets are easy to spot because they are a 2 piece welded design as opposed to a single piece stamped bracket. If you can get the headlight switch, vacuum lines & canister with it you'll have it a lot easier doing the swap.

  #6  
Old 06-30-2010, 09:14 AM
madtexan's Avatar
madtexan madtexan is offline
Senior Member
 
Join Date: Oct 2003
Location: Richardson, Tx, Good old USA
Posts: 206
Default

Quote:
Originally Posted by steve v View Post
they are a 2 piece welded design as opposed to a single piece stamped bracket.
That's right. I forgot they are made different. It's been so long since I converted mine I forgot about that.

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:20 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017