[DrBoeing]

I am sure that this has been asked before. Does the power window set up specific to certain years.
I have a 69 convertible, can I use the regulators out of a 71 or do they have to be from a 69?

[paint guy]

To my knowledge,69 is one year only on the fronts.68 was stand-alone also,due to the wing window.69 is one year only,due to the lack of a side reinforcement brace in the doors.70-72 are interchangeable,but different from 69 or 68.Rears are all the same.i put power windows from a 69 Grand prix without any problem in my 69 vert.Chevelle,skylark,Cutlass will also work.Cadillac will not.Good luck.

[cuz68]

I PUT A MOTOR IN MY 68-gto YEARS AGO OUT OF A 68 OR-69 SSJ gp, i HAVE MY OLD ONE AND THE OTHER 3 OUT OF THE ssj.

[marxjunk]

the motors are basically the same, the regs are unique...like stated 68 is 68...69 is 69 only 70 72 interchange

thats for the door regs, the 1/4 regs are 68-72...

wire harnesses have differences but will work if ya take it all from the car

68-72 elcamino works for 68 a-body

[69goatboy]

Anybody try the aftermarket power window regulator kits that Jeggs, Summit, etc. sell?

Here's the offering from Summit.

http://www.summitracing.com/parts/ELI-GM93-7072-K/

[cuz68]

What do they hook to and what do they do? TKS Randy.

[DrBoeing]

Another dumb question, what cars are interchangeable? I assume the Chevelle, Cutlass, Skylark are fully interchangeable, but what other vehicles, i.e is the Impala inter changeable

[paint guy]

Not 100% sure(but pretty close)Impalas and other "B"-bodies window regulators are not interchageable with "A" bodies.

[marxjunk]

chevelle, cutlass, skylark, Gran Prix, and lemans 2 dr only...no impala

[paint guy]

Dr Boeing: you have a P.M.

[DrBoeing]

Originally Posted by paint guy

Dr Boeing: you have a P.M.

Thanks, I have replied

[DrBoeing]

Does anyone know if a Power regulator from a Parisienne will fit