| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
Is the quick ratio steering box in the PY catalogue correct in saying 2.9 turns lock to lock. I thought I saw elsewhere that the stock is 3.5 and you can get a 2.5 lock to lock box? It's for a 68.....any insight is appreciated
|
|
#2
|
||||
|
||||
|
Not sure about the PY boxes. For an inexpensive and very do-able project do a search for jeep cherokee in this or one of the tech forum headings and you'll find alot of good info.
__________________
1968 Lemans Convertible Cameo Ivory, Red Interior, White Top |
|
#3
|
|||
|
|||
|
For some reason I have this list of Jeep box's that I think fit??
|
|
#4
|
|||
|
|||
|
the cherokee swap was popular because there wasnt much else out there...now you can go to NAPA and get a 12:1 box for a chevelle for 100 bux...i will look around i have the part number somewhere..
On the cherokee swap..your supposed to use the little square cherokee not the grand cherokee...the stops are closer to what a GTO would be, in other words, you get the full turning radius without backing up and trying it again...lol |
|
#5
|
||||
|
||||
|
I took one out of a '75 Impala from the junkyard, it had 2.75 turns lock to lock. When I looked it up at my store I found that '75 Impalas I believe had the exact same normal turn steering box but the Impala I believe had a quick ratio option too. I might double check that. Autozone's site shows the exact same boxes for both cars.
|
| Reply |
|
|