[grandville455]

Originally Posted by gtorich

http://s223.photobucket.com/albums/d...running003.mp4

Ok, played around with this, hope it works

Rich

That sounded pretty tame rich!.. That was other cam and heads right?

[gtorich]

Originally Posted by grandville455

That sounded pretty tame rich!.. That was other cam and heads right?

Darby, that was with the 6X-8 heads and Crower 60919 cam............I now have the 290 SD alum heads and the "Old Faithful" cam.........kinda odd but it doesn"t sound too much different than my old set up

Maybe i need to get some different mufflers instead of the street pro"s

Rich

[grrr421]

Has a better rumble than mine You win.

[ahnuld]

Mine is in my signature, at time idle was high and exhaust leak at header. TRi y's, tripower-not stock at all, 3 inch with thrush welded mufflers. Have electric cutouts but there closed in vid.

[grandville455]

Originally Posted by ahnuld

Mine is in my signature, at time idle was high and exhaust leak at header. TRi y's, tripower-not stock at all, 3 inch with thrush welded mufflers. Have electric cutouts but there closed in vid.

Pretty quiet once cruising or even getting on it. Love the inside very nice!

[ahnuld]

Originally Posted by grandville455

Pretty quiet once cruising or even getting on it. Love the inside very nice!

actually at car shows its one of the loudest, i set car alarms off 3 lanes over just idling down the road, my neighbours say they like me and hate my car, so i say job well done.

[jwcfbd]

Here's my 67 Firebird with hooker headers and flowmaster exhaust.
http://youtu.be/XyMRq8ne_WQ

[grandville455]

Originally Posted by jwcfbd

Here's my 67 Firebird with hooker headers and flowmaster exhaust.
http://youtu.be/XyMRq8ne_WQ

Sounded bad ass doing the burnout and then taking off!!

[jwcfbd]

Originally Posted by grandville455

Sounded bad ass doing the burnout and then taking off!!

Thanks.

[form74]

Ram Air 2 1/2 inch Manifolds, 2 1/2 inch exhaust with x-pipe and Goelrich Mufflers, Crower 60919 Cam.

At Idle



Down the track, will look for a better one.



Youtube link at the track

http://www.youtube.com/watch?v=UW30Q2lZ9Zs

Another Idle

http://www.youtube.com/user/formula74

[ta man]

Another one...http://s668.photobucket.com/albums/v...onepics265.mp4

[grandville455]

Sounds good, what magnaflows? Here is mine with a 3 1/2 X and 3 1/2 Bullets, I had to cut the X cause the headers that were in this car were Hooker super comps, and they were narrower than my Hustler's with those adapters, anyway after trying to figure out where to cut it and how much to weld back in etc so i could get it as close to the rear of the trans as possible, cause that's How it will be in spring. I ended up with a 1/4 gap at the top of the drivers collector ,cause the bullets were hitting the bottom of the floor by tunnel, this was just to hear how it sounded it with them, I will change it or just get a New X I haven't decided yet, But it sounds good! When I revved it the smoke is from dumping trans fluid down my carb from before to store it, and the mic kinda gets muffled when it is revved up too. This was just a test tho as its 50 here today !! Turn up the volume! . It's put away now til spring

[mogeo]

Mufflers are Magnaflow 14” case MPE 11226.

Sounds real nice. Great idle!

Cant believe more have not posted.

[archerytony]

Originally Posted by grandville455

Sounds good, what magnaflows? Here is mine with a 3 1/2 X and 3 1/2 Bullets, I had to cut the X cause the headers that were in this car were Hooker super comps, and they were narrower than my Hustler's with those adapters, anyway after trying to figure out where to cut it and how much to weld back in etc so i could get it as close to the rear of the trans as possible, cause that's How it will be in spring. I ended up with a 1/4 gap at the top of the drivers collector ,cause the bullets were hitting the bottom of the floor by tunnel, this was just to hear how it sounded it with them, I will change it or just get a New X I haven't decided yet, But it sounds good! When I revved it the smoke is from dumping trans fluid down my carb from before to store it, and the mic kinda gets muffled when it is revved up too. This was just a test tho as its 50 here today !! Turn up the volume! . It's put away now til spring

Darb
Sounds good alot louder than mine

[archerytony]

Originally Posted by archerytony

Darb
Sounds good alot louder than mine

Darb
Dont the H pipes work as well as the x?

[68lemansman]

Here is my lemans exhaust!

http://s1161.photobucket.com/albums/...6336279091.mp4

[1978 T/A]

http://www.youtube.com/watch?v=ofso4jLVBmw

Kind of a crappy vid I did a while ago. I am actually going to be changing my setup in the future.

[grandville455]

Thanks!.. I have a new pypes 3.5 X coming with 3" ultra flows... Yes I would think more people would want to post their stuff up!.

[TinInjun]

Darby, here is 3" system with X pipe and welded ultra flows.
http://www.youtube.com/watch?v=OqYbUXw4hQo

[rontiac]

Is that the road paver cam in there Darby? It sounds pretty beefy! What all have you done to the motor since it's gone in the bird?

My only sound is the old retired wagon in 2010 before the wreck. It'll sound different in the 65 next year!
The link in my sig is all I have.....
Iron headed, 60245, RPM and Quad, Dougs 1 3/4 headers, 3" pypes w/X, race pros, and 3" tails.