| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
Need to make some room in the garage
1970 GTO endura front bumper $400.00 1971-1972 front endura front bumper $300.00 1972 Ws 400 3spd motor intake to pan date code on block is 2/4/72 $500.00 71-72 doors with glass $200.00 1970 10 bolt rear bare housing upper control arm bushing mount was broken off but welded back on $200.00 Rally II rims $100.00 each or cheaper depends on codes on condition Rear seats $100.00 A/C boxs for under the dash and the engine compartment $200.00 New passenger side lower fender patch $70.00 1970 3spd manual tranny $200.00 Upper nos quarter panels they have the sail panels and rear window track and trunk track were weather stripping goes into good for patches in stead of making them $100.00 each they were cut above body line Misc interior parts.Black,green,saddle in color PM for what your looking for Misc glass front, rear and sides stearing column saddle in color for manual shift car $100.00 70 GTO passenger side fender needs lower patch new poly body mount bushings for 68-72 $80.00 Also have 1967 powder coated rear housing.no guts inside with new upper control arm bushing already installed (poly) $300.00 Above items do not include shipping would rather have bigger items picked up |
|
#2
|
||||
|
||||
|
hi I was wondering if you have any unscratched rear quarter glass specifically pasenger side thanks John
|
|
#3
|
|||
|
|||
|
I will look tomorrow.i just pulled one out and it has some small scratches but I have more to go through.
|
|
#4
|
||||
|
||||
|
Are the rear seats a 70 gto and what kind of condition are they? Both upper and lower? how is the material?
__________________
Driving my GTO listening to BTO! Let it Ride. |
|
#5
|
|||
|
|||
|
What shape are doors in? How are the lower corners?
|
|
#6
|
|||
|
|||
|
The rear seats that i have left.1st set is aout of a 72 GTO saddle in color burlap and foam is good but needs recovering 2nd set is out of a 71 lemans green and same as 1st set
The doors I have 2 drivers doors one is really nice no rust maybe a few small dings the other has some isues on the inside lower corners but outside metal is clean.The passenger doors 2 are really nice no rust maybe small dings and another with some inside isues.The doors with no rust really would only need a skim coat I brought them down to bare metal to see for myself.If I was doing another 70-72 I would definetly use these |
|
#7
|
|||
|
|||
|
The glass that i have are driver quality there not perfect some small scratches
|
|
#8
|
||||
|
||||
|
PM sent
|
|
#9
|
|||
|
|||
|
bump
|
|
#10
|
|||
|
|||
|
TTT
|
| Reply |
|
|